So, I bit the bullet and decided to rebuild the Delco Moraine brake booster in my '63 Deville due to a super hard pedal. Thanks to the many forum discussions on this site, I got it apart with no issues (and I'll post the removal tool I built later in another post and lend it to anyone who needs it). Unfortunately, I realized that I am missing the "support plate seal retainer" (see picture) that looks like it goes between the booster and the master cylinder. I believe the booster is original and has never been apart as the car only has 57k miles on it so that means I'm probably the culprit for the lost piece. When I got the car, the master cylinder was dry and rusted inside. I replaced it with a newer style master cylinder and, unfortunately, threw out the original master cylinder (and I usually keep EVERYTHING). I'm guessing the support plate seal retainer was probably on the original master cylinder and I probably trashed it along with the master cylinder. Is that possible to do or would that retainer plate been pretty obvious and split apart from the old master cylinder? Also, I'm guessing that plate/seal is required to hold the vacuum in the booster? Also, without that plate, could that have been why I had no power brakes because of no vacuum in the booster? All that said, does anyone have a support plate seal retainer for a Delco Moraine that they'd be willing to sell?
Tags:
Thanks for the reply but these are definitely too hard and not normal - I almost have stand on the pedal. After more research, I think I'm definitely missing that support plate seal retainer. I'm hoping someone can come to my rescue and either sell me just that support plate from an old, damaged booster or even sell me a whole booster that I could rob that part from.
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Started by Doug Scarrow in For Sale on Sunday. 0 Replies 0 Likes
just listed https://www.ebay.com/itm/266787800087Correct complete front unit coupling fits 1958 thru 1964 Cadillacs Hydramatic transmission The…Continue
Started by Doug Scarrow in For Sale Apr 26. 0 Replies 0 Likes
Just listed. https://www.ebay.com/itm/266786607755Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by