Well, I took a gamble on this one as the outside cover is obviously poor to fair at best, but the pages are stated as nice. Hopefully the pages on the inside are nice as the seller indicated!
I have been getting nervous that I would not find a 1964 Dealer Data Book as we approach 2014 and the 50th Year Anniversary look that model year. As you know from the 1963 Dealer Data Book, which I have been pulling info out of and including in the newsletters, has a wealth of information. I have had the 63 Dealer Data Book for some time but the 1964 is hard to come by it seems! I've seen some asking for a flat out $250 and up but hoped I could get one a bit better priced. With the January newsletter just 2 months away and our spotlight on a "movie star" car, I wanted to have at least something on hand to work with.
Here's the link and a couple of pictures of the one I got off ebay:
http://www.ebay.com/itm/Vintage-1964-CADILLAC-data-book-/1310583136...
Comment
1964 Dealer Data book arrived today and I'm very pleased. The pages inside are nice and that is actually what I'm after. As far as the outside it actually looks like it can be cleaned up somewhat!
Scans are going online here each months as I continue the 63 Data Book. I guess I have about 1/4th of it uploaded. Just pull the Literature drop down menu from header and go down to 1963 Dealer Data Book. I had hoped to have all pages scanned and uploaded by end of the year but may take a bit longer. I always like to go back and clarify, sharpen, color correct, and work on the scanned images a bit.
Started by Patrick Westphal in For Sale. Last reply by Jason Edge 15 hours ago. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website