I had my 64 Coupe Deville Dash Clock serviced through Clock Works probably 6 to 8 years back and it has worked great except having to reset it from time to time. In recent months it has sometimes stopped (a tap usually brings it back to life) and while it probably just needs cleaning and I do appreciate the original spring action electro mechanical workings, I decided to let Clock Works convert it to quartz and just sent it out for conversion yesterday. In doing so I obtained updated pricing and other information and thought I would share the details with everyone. .
Converting Dash Clock to Quartz
Per Clock Works: This movement should run 10 years without the need for periodic service and keep much more accurate time than the original type movement. Unlike some conversions, our installation will not alter the hands or face of the clock and will run off your car’s existing wiring. The original set stem remains functional.
- Cost: $159.95 plus shipping + $13 return shipping in the US.
- Warranty: 2 years
- Turnaround time should not exceed a few days.
Servicing & Refurbishing the Original Dash Clock
- Cost: The price to service the original movement is $59.95 with a possible $30 coil charge if the electrical coil is damaged and needs replacement. Add $13 return shipping in the US.
- Warranty 1 year
Converting Rear Seat 75 Series (Limo) Clock to Quartz
- Cost: $169.95 to $189.95. Various clocks were used for this application so the actual
cost will depend upon which clock was used. Add $13 return shipping in the US.
- Warranty: 2 years
- Turnaround time should not exceed a few days.
Contact Information:
Clock Works
1745 Meta Lakes Rd
Eagle River, WI 54521
Phone: 715-479-5759
WWW.CLOCKWKS.COM
Additional Notes:
Two Brands brands: Borg and Westclox.
Our dash clocks were supplied by Borg and WestClox. Once removed you will see their name stamped on the back of the casing.
To Remove:
Grip outer chrome rim firmly and rotate clock counter clockwise about 1/6 turn or to about the 10 o'clock position and pull straight out. (It usually takes a very firm grip.....no sissy gripping if you want to remove the clock!) Disconnect light and power connector being careful not to touch inside of power connector to metal. It is enclosed in a hard plastic shield and can just be laid down on the lip of the opening until ready to reinstall the clock, however, if you will have it unplugged for a length of time or moving wires around you might want to put electrical tape over the end.
Cleaning:
There has been more detailed info posted on cleaning these clocks however, I have found a blast of compressed air to remove the dust and debris will often bring them back to life. The tuner lubricant cleaner that Radio Shack sells is also good to clean the inner components of the clock (and many other electrical/mechanical components).
Also See this Blog for discussion with pictures for removing and more:
https://6364cadillac.ning.com/forum/topics/how-to-remove-clock?comm...
Comment
ClockWorks is a good outfit to deal with.
Thanks for the info, can't wait to take mine out and try to clean myself and if not successful I will send out.
Clock converted to quartz by Clock Works delivered today, in the car, and working perfectly.
Delivery time including shipping to clock works, conversion work, and shipping back was a total of 5 Days! Very Pleased.
Here is a link to Craig's Seminar: http://6364cadillac.ning.com/video/2012-clc-grand-national-seminar-...
Craig is a brilliant guy and completely enjoyed his seminar on clocks, gauges and speedometers at the 2012 GN, however, Clock Works will rebuild/refurbish for $59 and warranty for a year and their turn around time is very fast. With Craig you get quality craftsmanship from an expert that enjoys his hobby immensely so if not in a hurry and don't mind spending a little more might be a good alternative.
Speaking of Craig I do need to get his seminar uploaded to our new YouTube Channel.
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Started by Doug Scarrow in For Sale on Sunday. 0 Replies 0 Likes
just listed https://www.ebay.com/itm/266787800087Correct complete front unit coupling fits 1958 thru 1964 Cadillacs Hydramatic transmission The…Continue
Started by Doug Scarrow in For Sale on Saturday. 0 Replies 0 Likes
Just listed. https://www.ebay.com/itm/266786607755Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website