It has been quite a while since I've added a 1964 Eldorado survivor to the Registry. As of today, (11/14/21) I have 322 on the roster with VIN and data plate information. BTW, the roster is public on the New Cadillac Database, in the "survivor" section. If you are unsure if your car is on the roster, you can contact me (Jerry Puma) by email at jppuma@yahoo.com. (I know some people are concerned about putting their information "out there"). I have maintained the roster for 30+ years, and I can assure you that I do not have any devious plans for the data!
Tags:
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 7 hours ago. 5 Replies 0 Likes
Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue
Started by Jason Edge in Trivia 15 hours ago. 0 Replies 0 Likes
Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 15 hours ago. 1 Reply 0 Likes
Ok. Here is a fastener I see about every day working with my big inventory of fasteners, and thought it was worth posting as trivia. If you saw my post on Facebook (I do sell them), wait to see if…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons May 14. 13 Replies 0 Likes
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by