Just wondering if anyone knows of a place to get interiors done in the Pacific Northwest. I'm looking at seats, door cards and headliner. I live in the Tacoma Washington area so west side is preferable .  appreciate any help.  

Facebook Facebook

Views: 302

Reply to This

Replies to This Discussion

Best to go to cruise ins and talk to people. Find out where they go and who is known for a good job.

That's Russ, thats tough this time of year in the PNW as its not cruise season. Everyone hibernates up here and works on their cars. 

Best to go to cruise ins and talk to people. Find out where they go and who is known for a good job.

Check out and join a Cadillac LaSalle Club (CLC) region in your area.   They will be an invaluable resource for networking and finding local recommendations. Here is one I see on the list of CLC regions in WA state on the Chapters & Regions page at https://www.cadillaclasalleclub.org/general/custom.asp?page=regions... :

PACIFIC NORTHWEST (1966)
Robert A. LeCoque
P.O. Box 3025
Renton, WA 98056-5025
(206) 799-6585
rLecoque@msn.com
WEBSITE

If into a member of the CLC join them at www.cadillaclasalleclub.org/join    They currently have a free 6 month free membership deal through now and the end of the year!

Thank you Jason, I will look into that 

try these guys they supposedly took over from the guy that did a great job on mine many years ago. it looked factory correct when I got it back including the crests embossed in the leather.The company is -- Texas Auto Upolstery --in Vancouver Washington
The new owner is --Emilio @ 360 771 3565

Thank you Maurice I will look them up. 

RSS

Photos

  • Add Photos
  • View All

Forum

Welcome Returning Member Maurice Hamelick from the Netherlands!

Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari 5 hours ago. 1 Reply

I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue

Rear suspension project

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 11 hours ago. 2 Replies

I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue

Front door handle lights not working

Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Wednesday. 3 Replies

My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service