Hi guys,I purchased what I thought was a complete exhaust system from Classic Exhaust 3 or 4 years ago and put it in the garage without opening the box when it arrived and just now getting to it and found that there is no resonator.My question is what is the purpose of the resonator and do I really need it.

Views: 478

Facebook Facebook

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Jason Edge on June 2, 2015 at 8:29am

Here is a pretty good write-up I found on resonators: http://www.ehow.com/about_5765675_exhaust-resonator_.html

If looking to stay with the factory look, the original was about 21" long and 5" wide (5 1/2" at the ribbed ends).  To have one depends on what you are after: super quiet factory sound, factory exhaust, or to be able to hear the exhaust ranging from low rumble without a resonator to a throaty to load sound with say only Flowmasters mufflers.

Comment by William Cameron on June 1, 2015 at 11:11pm

 Jim, I have a brand new resonator for the 64' email me at hdp10@yahoo.com for pics and price, I also have everything up to the Y pipe, except for the muffler, if anyone is looking for exhaust pipes 

Comment by Jim Davis on May 31, 2015 at 10:43pm

I found the invoice and it just says complete exhaust system and the price I paid.I guess that's what I get for not checking right away.If anyone has a good one lying around let me know.Thanks

Comment by Jason Edge on May 31, 2015 at 9:08pm
They take the rumble out of the exhaust sound and makes it run more quiet. My exhaust from them came with the resonator but believe you could get the system without it. Hopefully you have an invoice or some type of receipt that you can confirm it was not supposed to include the resonator.

Photos

  • Add Photos
  • View All

Forum

Adapt, Improvise and Move an Cadillac Engine!

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply

Just wanted to pop in and say hello and give a quick update on a couple of things and share a garage thing I thought you might get a kick out of. First, my arm is out of the brace as of last Monday…Continue

Front Fender Skirt Backing Bracket Access – Question + Cad Plate Love

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 1 Reply

Hello all,I’m in the middle of swapping out the front fender skirt backing brackets on my ’64 Fleetwood and had a quick question for the group. I picked up a beautiful fresh set of cadmium plated…Continue

Power Booster Install

Started by Rob Spring in 1963/64 Cadillac Specific Discussion. Last reply by Rob Spring Apr 8. 9 Replies

Hey! I’ve seen the 63/64 power booster and master cylinder combination has been covered very clearly. I’m in the process of replacing mine. I was hoping someone could give me insight on a specific…Continue

1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly

Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin Apr 7. 3 Replies

Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering.  Also, possibly looking for an oil filter housing assembly for a 1964 429 motor.  Starting to get…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service