When I created this site on Aug 7, 2012, using the Ning.com tools I wanted to scream out that we are the 63/64 Cadillac Website and created a pretty tall custom header. As of today it has been reduced by about 1/3 in height, and now includes all of our website award badges which provide more real estate for the content posted by our members on your PC, laptop, smart phone. As we go forward there will be periodic tweaks to hopefully improve the website!
Tags:
Clovis, It's the 3rd iteration of a 1963/64 Cadillac Site I have been involved with. I helped manage a MSN Groups Site from around 1999 to 2008, then MSN groups went away and we moved to Multiply.com hosted site, and then they went away in 2012 and we moved here to the Ning.com site. Each "forced" move turned out to be a very good thing as the hosted sites were a vast improvement over the previous website. We are currently using a Ning 2.0 version of their site and they have put in place about a year ago a Ning 3.0 version that we will need to eventually convert over to, however, I want to make sure the 3.0 version has been fully tested by others before we take the plunge. Hopefully, all of our content will port over and we will just end up with a new look and feel that is more versatile than what we currently have.
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion 14 hours ago. 0 Replies 0 Likes
Is anyone here planning on going to the Back to the 50’s car show in Minnesota?
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Saturday. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
June 22, 2025 from 8pm to 9:30pm – Zoom
0 Comments 1 Like
© 2025 Created by Jason Edge.
Powered by