I have been waiting around about 2 months for another Group 60 Original Style battery (long story), and finally got Dino fired up yesterday and backed out of the garage and the dust knocked off of her today after finally receiving my new battery.  It felt good to get the Caddy back out of the garage and washed off.  Next is some intense cleaning. I started with the inside today and will hit the outside and engine compartment in the coming days. Here's a few pictures from today.. (Hey, my turn to show off a bit! LOL):

Facebook Facebook

Views: 776

Reply to This

Replies to This Discussion

I'll be heading out to Charlotte, NC for the first meet-up with the Carolina CLC Region. We will be taking in the Carolina's Aviation Museum . One of the highlights for me will be to see the "Miracle on the Hudson" A32-214 Airbus that Capt Chesley "Sully" Sullenberger flew into the Hudson River in 2009. One of the big perks of being in the CLC, is joining with local CLC Regions and taking tours like this. I remember going to the NC Transportation Museum last year with the Carolina Region and being really blown away. Pretty impressed that little ole North Carolina had something of that magnitude... .but again we were First in Flight!

White floor mats, I drive mine every weekend, they wouldn't last. Do you have special shoes you reserve for only driving the car?
Please tell me their blue suede LOL

I’ve got 2 sets. One for show, one for everyday use. I use to have the butter brown ones everyone sells and hated them as they clashed with sandalwood carpet. Spec manual shows white mats with sandalwood interior so I  switched to what I think would have been correct with my interior.

RSS

Photos

  • Add Photos
  • View All

Forum

seat foam replacement

Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 4 hours ago. 1 Reply

does anyone out there have any experience with seat foam replacement on  a 63/64 Cadillac.  I had my seats reupolstered  many years ago in original leather/fabric and they still look great, but the…Continue

1963 carter afb carbureter stainless steel shim

Started by tim sparks in General Discussion 5 hours ago. 0 Replies

anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue

Timing cover corrosion

Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 12 hours ago. 1 Reply

Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump  Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue

Convertible bumper jack

Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark 20 hours ago. 13 Replies

My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service