Fellow Members,

The self starter has an advertiser that has direct fit exact reproduction radiators.  They come with a larger 2.5" core and state they will cool better than the original.  My current original radiator is leaking around the top seam and seems to be spreading the length of the radiator...while not bad at the moment I can only assume I'm riding on borrowed time!  Initially they come unpainted but will do that for an upcharge.

Here are the details....  They gave me a delivered price of $290.00  I know I could send out the original but I'm likely going to spend more to do that.  I'm intrigued by the additional cooling capability as I live in the Midwest and the summers can be brutal.  In the end I want to do whatever is best for my grand ole lady!!

New 100% Aluminum Radiator- Lifetime Warranty
Fits Models: 1960-1965 Cadillac's

Stamped and welded construction sets this apart from the rest. Direct replacement for 60-65 Cadillac's (check inlet and outlet positions). Original style ribbed tank.
1 1/2" Inlet, 1 3/4" Outlet- Driver's side
Dual 1 1/8" high flow tubes

  • Double the capacity of stock 2-row
  • 33% more capacity than 3-row 1/2"
  • 12% more capacity than 4-row 1/2"

Core size: 25" wide, 17" tall, 2 1/2" thick
Overall size (widest points): 25 1/4" wide, 23 1/4" tall, 3" thick

Has anyone had any dealings with these folks good or bad?

Thank you in advance....

Kevin

Facebook Facebook

Views: 211

Reply to This

Replies to This Discussion

Tony, Kevin is asking if anyone has had experience with Auto City Classic and their radiators, and if if so, good or bad? He is asking for feedback.  He asked me about the company and their radiators & I indicated I have zero experience with the company or aftermarket radiators and suggested he post his question here.  If someone has had experience with this company or perhaps other brand aftermarket radiators, specs, etc. please provide feedback. 

RSS

Photos

  • Add Photos
  • View All

Forum

Convertible bumper jack

Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 1 hour ago. 12 Replies

My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?Continue

Timing cover corrosion

Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion 2 hours ago. 0 Replies

Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump  Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue

Power steering fluid

Started by Bobby Brown in General Discussion. Last reply by Logan Robb 6 hours ago. 2 Replies

My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue

Dino Diaries - July 11, 2025 - Busted!

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 4 Replies

So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service