Good morning all.  I am very new to Cadillac ownership and to the chapter, but excited about being part of such a good community. I just got my 63 Fleetwood and beginning to learn about her.  We're hoping for my wife and I to get her ready to drive to the 2021 Grand National.  Noticed a couple of issues right off.

  1.  My tranny is leaking a bit. 
  2. The power seat motor runs, but there is not movement in any direction (it was tilting, but that has now stopped)

Any insights from the group?

Thanks,

Chris 

Views: 267

Reply to This

Replies to This Discussion

Hello Chris, 

go to the help section up above, scroll down to seat transmission cleaning repair that should help you figure out what’s happening,old dried up grease is usually the culprit. For your trans leak grab a can of carb , brake cleaner and spray it down and wipe it down with a rag , take the car for a ride if u can or maybe let it ide for a bit , you might be able to see where it’s coming from, mine was leaking from the speedometer housing, it was an easy fix 2 o-rings hasn’t leaked since ..good luck hope the info helps

Thank you Ray.  Appreciate the help.  Chris

Was admiring your interior project pics, nice work.  Where did you get those beautiful seatbelts?  Chris

If your looking for seatbelts,you might have to reach out to Jason Edge .... all those pictures you see in the help section are his collections , my seatbelts came with my car , I think they were an option back in 63-64 

Seat belts are one of the most in demand items I have on my Wait List. At least count I had about a dozen customers lookigng for original front seat belts and double that looking for rears. I am pulling them in hear are there, maybe 1 or 2 a year sometimes but when you are getting dozens of requests a year that means means demand has far outstripped supply. At least my supply. Since I give 1st preference to Chapter members, I can't recall anytime in the last 5 years a set went to a non-Chapter Member. That and the 10% discount I give are 2 good reasons to join the CLC (www.cadillaclasalleclub.org/join) and our Chapter.  For anyone that want to go on the Wait List give me a shout at jasonedge@nc.rr.com  

RSS

Photos

  • Add Photos
  • View All

Forum

!964 Deville Front Bumper

Started by Patrick Westphal in For Sale. Last reply by Jason Edge 12 hours ago. 1 Reply

Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell.  If you are looking for these contact me and we will talk about it. …Continue

Which are best Shocks for 64 that are closest to Original in Ride Quality?

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies

Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue

1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply

Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service