my pump has gone out again in 63, 390. I dont know why, either too tight a belt or something else, been 2 or three since rebuild and 13k miles.. it was a gates unit. it seems for a while the cordone unit was the only one out there with the enclosed impeller but apparently, they are no longer available anywhere, even there company site doesn't list them. While searching, I found that rock auto now has a supplier with the enclosed impeller, https://www.usmotorworks.com/catalog/ through rock auto.. may give it a try,, anyway, its just for info as the enclosed impeller has been hard to come by, not sure it makes a difference, but I think its what was on the original motors..
Tags:
Hey Kim probably Chinese made junk
The enclosed impeller is what was on the original water pumps. What are you putting in your radiator? The coolant acts as a lubricant for the water pump.
I used on of the 50/50 antifreeze products out there,
Started by Bill Wolf in General Discussion. Last reply by Dennis P. DiBari 16 hours ago. 6 Replies 0 Likes
I am trying to replace the front wheel cylinders on my 63 SDV and can't figure out how to get a wrench on the bolts holding them on. Does the backing plate have to come off and if so, how? Thank you…Continue
Started by Anthony Vanacore in For Sale. Last reply by Anthony Vanacore May 6. 5 Replies 0 Likes
Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed. During this process we also installed factory power door locks to the…Continue
Started by Jason Edge in General Discussion May 3. 0 Replies 0 Likes
As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue
Started by Anthony Vanacore in Wanted to Buy. Last reply by Russ Austin May 1. 1 Reply 0 Likes
Hello,I am looking for an original trunk for a series 62 convertible. Condition does not need to be perfect and does not need to be complete, I am looking for a set that I can use as a template. I…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
May 17, 2026 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by