Just looking for spec for my 64
What is Points gap supposed to be
Dewell angle

Thanks
Facebook Facebook

Views: 81

Reply to This

Replies to This Discussion

Hi Joe,

     The dwell angle is usually set from 28 to 30 degrees.  Pretty sure that is equivalent to .016 with a flat gauge by hand.  Just make sure your dwell gauge is still accurate - mine was not.  If the points and condenser are not one piece, you can get the flat gauge in there with the points on the HIGH spot of the cam.

Dennis DiBari, Cottekill, NY

Good morning

Thank you
yes it separate

Agreed the one I had was old one from Sears
Haven’t used it in 35 years
Found it in my mothers basement where I had some oils tools
Have a great day

You're welcome, Joe.  Use the flat gauge to be sure (.016) it is accurate.  I picked up a used Dwell meter on Ebay and had it checked with my friend's to be sure.  Talk soon.

Dennis DiBari

Dennis

Thanks got another meter
All set car running great

Have a good afternoon

Joe,

     GREAT work!!  Talk to you soon at the Zoom meeting.  

Dennis DiBari

Yes
see you on zoom

thanks again

RSS

Photos

  • Add Photos
  • View All

Forum

1963 Eldorado Trim complete set

Started by Robert Dye in For Sale 6 hours ago. 0 Replies

This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill 22 hours ago. 8 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Convertible bumper jack

Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark on Monday. 4 Replies

My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?Continue

Wanted Cadillac Lasalle 2 inch Windshield Decal Sticker

Started by Doug Scarrow in Wanted to Buy. Last reply by Dennis P. DiBari on Saturday. 3 Replies

for close to 20 years I have had a lovely Club Decal on my windshield now I wish to replace the windshield and would love to buy a decal if any one has one available See attached photosContinue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service