Tune up
What is Points gap supposed to be
Dewell angle
Thanks
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi Joe,
The dwell angle is usually set from 28 to 30 degrees. Pretty sure that is equivalent to .016 with a flat gauge by hand. Just make sure your dwell gauge is still accurate - mine was not. If the points and condenser are not one piece, you can get the flat gauge in there with the points on the HIGH spot of the cam.
Dennis DiBari, Cottekill, NY
-
Permalink Reply by Joseph Innamorato on
-
Good morning
Thank you
yes it separate
Agreed the one I had was old one from Sears
Haven’t used it in 35 years
Found it in my mothers basement where I had some oils tools
Have a great day
-
-
You're welcome, Joe. Use the flat gauge to be sure (.016) it is accurate. I picked up a used Dwell meter on Ebay and had it checked with my friend's to be sure. Talk soon.
Dennis DiBari
-
-
Dennis
Thanks got another meter
All set car running great
Have a good afternoon
-
-
Joe,
GREAT work!! Talk to you soon at the Zoom meeting.
Dennis DiBari
-
-
Yes
see you on zoomthanks again
Photos
Members
Forum
Clock Repair
Started by Michael Vogler in General Discussion. Last reply by Dennis P. DiBari 16 hours ago. 6 Replies 1 Like
63/63 Owners,The clock in my '64 just went out. It appears that the mechanical component is working properly, so I think the coil has failed. I contacted Jerry at Clockworks and he advised that he…Continue
No dash lights, headlights only come on with dimmer
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton 18 hours ago. 6 Replies 0 Likes
I’m in the midst of refreshing some things in my dash. I got my passenger ash tray working for the first time ever apparently, evident by the factory defect tag. “While I’m in here I might as well…Continue
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler 19 hours ago. 14 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Down and Out for a Couple of Weeks --> but On the Mend
Started by Jason Edge in General Discussion. Last reply by Michael Vogler 19 hours ago. 3 Replies 0 Likes
I have been more than a bit quiet the past couple of weeks due to a really bad fall January 31 where I tore my right knee MCL ligament and ruptured the ACL Ligament. MCL will heal in time but ACL is…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
