Tom & Kathleen Bahner’s 1963 SDV on 2024 CLC Kansas Driving Tour

On the 2024 Cadillac & LaSalle Cadillac & LaSalle Club National Driving Tour in Kansas, we have one 63/64 Cadillac Chapter member car on hand, Tom & Kathleen Bahner’s 1963 Four Window Sedan de Ville and of course as Director of the Chapter I have to share some pictures of this lovely couple and gorgeous car! These pictures were taken today in Marquette.

Views: 63

Reply to This

Replies to This Discussion

Thank you Jason. It was great to finally meet you face to face. You definitely showed your dedication by traveling over 1200 miles to attend. Thanks for all you do for our Chapter and the CLC. This was our first driving tour and it was a blast. Very well organized with some sites we haven't been to in years and also sites we've never been to. 

Tom and Kathleen

Hi Tom,

     Just saw the pictures Jason just posted of the Driving Tour in Kansas.  I have to say that your car is beautiful and the pictures turned out great.  Great pictures and a great 63/64 Chapter!

Dennis DiBari

Cottekill, NY

Hi Tom, Left host hotel today and sitting on bed in Kansas City and will be slowly making my way back to NC in the next 3 days. It was a lot of fun hanging out with you and Kathleen and hope to see you two at one of our 2025 CLC events.   It was actually 1300+ miles each or 2600 miles round trip, but worth every drip of gas to have this much fun. For any of you that have not attended a Grand National or National Driving Tour, you really do not know what you are missing.   

RSS

Photos

  • Add Photos
  • View All

Forum

Power Booster Install

Started by Rob Spring in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Hey! I’ve seen the 63/64 power booster and master cylinder combination has been covered very clearly. I’m in the process of replacing mine. I was hoping someone could give me insight on a specific…Continue

Complete Front End Rebuild

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Mark Mata yesterday. 1 Reply

I meant to make this a priority over the winter and didn't get that far. I've tried to source all the parts individually, but that is a daunting task. Partly because I don't want to miss any…Continue

1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly

Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin on Wednesday. 1 Reply

Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering.  Also, possibly looking for an oil filter housing assembly for a 1964 429 motor.  Starting to get…Continue

A Shout Out to Alan Grist & Some Pictures of His 1964 Series 62 4W Sedan

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Wednesday. 2 Replies

As they say, Better Late Than Never!I want to give a shout out to 63/64 Chapter Member Alan Grist, who brought his 64 Series 62 Four Window Sedan, to the 2025 CLC Winter Board Meeting in Chattanooga,…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service