I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal write up later on.
SO THE SUNDAY BEFORE LAST, me, my wife Cheryl and our Yorkie Presley took a spin down to local frozen custard shop. my 64 Coupe de Ville 'Dino' was running good but Cheryl noticed a bit of steam or misting from under the hood. It was not running hot, in fact just above the 1/4 marks as always.
BACKING UP A BIT, I had noticed some leaking around the now old radiator hoses and those Tower Clamps. Tower clamps were original, but only allow so much tightening (unlike worm gear clamps), and I had tightened most to the max and still saw a bit of the green after long drives and figured it was time for new hoses and to go back with some of my better cad plated clamps. I also saw some dripping around the drain valve. I have plenty of those, so no big deal.
BUT RECENTLY I saw what looked like some seepage from the lower edge of the upper tank at a solder seam.. nut since it was beneath the cap, not sure again if it was a physical leak.
NOW BACK HOME AFTER THE "STEAMING" ENGINE BAY, I fired it up and saw intermittent mists of steam blowing out from the cooling fan air flow. I then looked at the rear of the radiator through the fan shroud and fan blades and saw IT IS LEAKING FROM THE CORE!
THAT MEANS TIME TO RECORE!
I BROUGHT THIS UP AS A DISCUSSION TOPIC, in our zoom meet-up as I really hadn't done much research, and there was a good discussion regarding repairing, replacing the core (recoring), and old school shops still around that provided the recore service. I also shared the current listings of radiator service shops listed in this past month's Hemmings Motor News. A couple of members suggested local shops. Roy Brosi even checked with a local shop the next day and is waiting on pricing.
LOCAL SHOP TO THE RESCUE! For over 100 years there had been a Sapps Radiator Shop in the Raleigh/Garner area but remember they had closed at some point. Someone said they had reopened under a new name. Google quickly determined they were doing business under the name Holmes Welding and Radiator Service.... and here is the kicker... only 3 miles from me! I have had and sold a few pretty decent used Harrison 3-row original radiators over the years but right now I only had one that looks like it may be leaking and needs the core replaced.
So, yesterday I headed to Holmes Radiator with that extra radiator in hand, and had a very positive experience with the owner Leroy Holmes, who has 40+ years experience, and is someone that definitely knows their way around these old radiators. He immediately started spouting of specs and facts that made me know I was in good hands. He ask me to give him a couple of hours so he could check ordering the cost and get a final cost back to me.
He called back and said $787 and it would be like new! I was actually thinking (& hoping) $700 to $800. I know this is not 1980 and you are not going to get this done for a couple of Benjamins like you could 40 years ago. I also knew I would have spent more to stay original ... but really, really didn't want to go much over $1000! I gave him the green light, and he said he would order the new replacement core and should have it completed by next week.
Since it has been a while since I have done any real restoration or repairs on Dino, I will share this as I go along on the website forums, and put together a tech tip article for future newsletter, and add radiator related information to our Help Page and Parts & Service page. I will wait to get my radiator back before I add Holmes Radiator to our Parts & Service page, but have a good feeling about this.
Stay tuned for more! Below are a few quick pictures to accompany the write-up above. Jason.
Dino's Radiator Leak from back facing side of radiator! Not good!
Top Section at front bottom of upper tanks seems to be springing a leak!
Here is the original Harrison 3-Row Radiator I dropped off at Holmes Radiator Yesterday
Here is this months listing of Radiator Service Shops in the Nov 2024 Issues of Hemmings Motor News. This was shared in our Zoom Meet-Up Sunday.
Tags:
I went ahead and inserted the 4 pictures you had sent into your reply.
The radiator looks fantastic!
I added Leonard's radiator to our Parts & Service page. I will add Holmes Radiator after I get mine back assuming it is also a quality rebuild/recore!
I've judged our cars many times at the CLC Grand Nationals and would not deduct any points. As long as it is the original style radiator, we are not going to get that picky. If you show up with a bright aluminum radiator or something clearly aftermarket you would lose points on authenticity. You have to remember we also look at "workmanship" & "condition", so you can show up in an absolutely original radiator and looks more points if it is cruddy and leaking.
Speaking of the C Channel, my guy did not mention it as an option and would have probably opted for it also if it were offered. Hopefully mine will be good to go for many years.
That is fantastic. I will be going through this process in the near future! I am going to clean up a bit and paint a few things here and there. I thought I had the shroud sanded pretty good (150, then 220 then 320 grit wet sand) but did it all in a hurry and primed this morning and would have turned around and top coated with the 1 hr non-wrinkling recoat window, but saw some flakes inside the shroud. It is somewhere no one will ever ever see, but will probably end up sanding it down some more and repriming. Painting and cleaning is why it took me 3 months to rebuild my engine! I am also going to try and get all tower clamps on and not leaking which can be a struggle. I had tower clamps in the top but still using worm gear clamps on the bottom.
Got my Radiator back from Holmes Radiator here in Garner NC (outside Raleigh) and am very pleased so far. It of course is not in the car, but it has been pressure tested and do not expect any leaks. I will be a bit slow going installing as I will want to do some cleanup and repainting of some related items. I also just repainted the shroud and will get some pictures.
Here are some pics of the recored & rebuilt radiator:
Jason,
It looks great!!!!!!!
Dennis DiBari
While I have the radiator and shroud out of the way I have started a bit of cleanup at front of engine and frame doe remove a bit of the dirt and grime hard to get to with these parts in placed. I also replaced the four condenser to side mounting bracket screws and U-Clips last night with freshly cadmium plated fasteners. See picture below with arrows pointing to these screws & clips.
To me just updating minor things like this is very rewarding ... but I will want to get that radiator back in sooner than later. There may be a couple other areas to clean up a bit, or address but will probably get that radiator back in soon. I have been completing a big fence project, and picking at the next Newsletter (which I should have out before too long), but trying to set some time aside at night to also pick at "Dino!".
Here is that picture from last night:
Started by Ken Stout in For Sale 5 hours ago. 0 Replies 0 Likes
1964 Cadillac DeVille convertible! Runs and drives perfectly! Factory correct 429 c.i. engine runs great and transmissions shifts as it should! Factory A/C car, converted to R12 freon, A/C works but…Continue
Started by Russ Austin in General Discussion 6 hours ago. 0 Replies 0 Likes
I have a 63 CDV with factory bucket seats for sale. Engine runs and I have not driven the car. 44,000m miles, clean AZ title. I believe this is a California car as there is an emissions sticker on…Continue
Started by Russ Austin in 1963/64 Cadillac Specific Discussion 6 hours ago. 0 Replies 0 Likes
I brought in a 63 4 window sedan and a 64 6 window sedan for parts. Bumper buckets are sold and I do not have any in stock. Please send me an email if you would like any parts. …Continue
Started by Russ Austin in General Discussion. Last reply by Russ Austin 13 hours ago. 3 Replies 0 Likes
The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge. Powered by