I was thumbing thru parts car folders and run across the 63 Eldorado I parted out way back in 2006 and saw the dirty but good condition body tag. I like to clean them up I guess as a token and of course to check out the details listed.
This body tag tells me:
02D - Built 4th week (D) in February (02) 1963
1385 - 1385th Eldorado (of 1825) built
Trim 19 - Red Interior
Paint 92 - Fire Frost Silver
ACCessories: E- Soft Ray Tint; S - Power Trunk; M - Power Door Locks, K - AC
Now...WHY WOULD I PART OUT AN ELDORADO:
- Most of interior missing, gutted
- primer body needing a lot of work
- top needed to be replaced
- Engine was rebuilt but non-matching VIN
- THE BIGGIE! NO TITLE: I went to NC DMV and they said I would have to jump thru some major hoops including getting an inspector do "VIN Rub", run a check on it, and I would have to carry indemnity bond insurance for I think 2 years .... maybe it was 3?!
By 2001 I was also downsizing my fleet of driver Cadillacs trying to get down to the one. I probably still had 3 or 4 licensed drivers at this time.
The good thing about this car was it had a rebuilt engine and transmission. The guy I bought it from had spent a lot of up front money to have them rebuilt, and was going to move on to body, paint and interior but that thing called a "Divorce" happened and he had to liquidate... Fast!
So for me it was an opportunity to pick up the rebuilt engine and transmission to help someone else restore their Cadillac, and I end up with a LOT of extra parts to sell and use!
This is an abbreviated version of the story but thought I would share here. Most of my parts cars have a unique story... and this Eldorado was no exception.
Here is a picture of the body tag and a picture after just pulling it home.
Tags:
Jason
Nice find. Originally Frost Silver. I will be contacting you for some parts.
Also, As a new member, I wanted to thank you for all your help. Your a great resource
Marshall
Marshall, Keep in mind this parts car was 24 years ago and it and 99% of the parts have been long gone. I am replying to your email right now. Jason.
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 4 hours ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by