Fellow Members,
The self starter has an advertiser that has direct fit exact reproduction radiators. They come with a larger 2.5" core and state they will cool better than the original. My current original radiator is leaking around the top seam and seems to be spreading the length of the radiator...while not bad at the moment I can only assume I'm riding on borrowed time! Initially they come unpainted but will do that for an upcharge.
Here are the details.... They gave me a delivered price of $290.00 I know I could send out the original but I'm likely going to spend more to do that. I'm intrigued by the additional cooling capability as I live in the Midwest and the summers can be brutal. In the end I want to do whatever is best for my grand ole lady!!
New 100% Aluminum Radiator- Lifetime Warranty
Fits Models: 1960-1965 Cadillac's
Stamped and welded construction sets this apart from the rest. Direct replacement for 60-65 Cadillac's (check inlet and outlet positions). Original style ribbed tank.
1 1/2" Inlet, 1 3/4" Outlet- Driver's side
Dual 1 1/8" high flow tubes
Core size: 25" wide, 17" tall, 2 1/2" thick
Overall size (widest points): 25 1/4" wide, 23 1/4" tall, 3" thick
Has anyone had any dealings with these folks good or bad?
Thank you in advance....
Kevin
Tags:
Tony, Kevin is asking if anyone has had experience with Auto City Classic and their radiators, and if if so, good or bad? He is asking for feedback. He asked me about the company and their radiators & I indicated I have zero experience with the company or aftermarket radiators and suggested he post his question here. If someone has had experience with this company or perhaps other brand aftermarket radiators, specs, etc. please provide feedback.
Started by Bobby Brown in General Discussion. Last reply by Dennis P. DiBari 7 minutes ago. 1 Reply 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 4 Replies 0 Likes
So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by