1964 Comfort Control Power Servos & Transducers - Feedback on Rebuilding
I often receive requests for good 1964 AC Heat Comfort Control Power Servo’s and/or Transducers. I currently have 6 Power Servos and 3 transducers and all leak down with the vacuum pump. Some look nicer, cleaner than others in terms of the resistors and electronics/circuit board on the power servo but again all leak down.
I noticed that Caddy Daddy sells the Power Servo refurbished for $385 with a $175 core charge. They do not list the transducer ... as far as I can tell.
I believe Cadillac Tim (Tim Groves) rebuilds/refurbishes both power servo and transducer from looking at his website (www.cadillactim.com) and from memory.
My question is does anyone have experience with a rebuilt power servos and/or transducers and who was your source, turn around time, price etc.
Just to note:
My price for a Power Servo Core to customers is $80 ($60 with Chapter Discount).
My price for a Transducer Core to customers is $60 ($45 with Chapter Discount).
I would appreciate any feedback.
Jason.
Replies to This Discussion
-
Permalink Reply by Matt Andrews on
-
Tim repaired the circuitry and replaced the diaphragm in my power servo. It wasn’t leaking but figured it would be a good idea to replace the sixty year old rubber while he had it.
-
Permalink Reply by Jason Edge on
-
Good call. Those 60+ year old rubber diaphragms are a tear waiting to happen!
Photos
Members
Forum
Take heads off for rebuild
Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 3 Replies 0 Likes
Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue
Headlight conversion
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill Jul 27. 2 Replies 0 Likes
I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue
What parts do you need for your Cadillac?
Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies 0 Likes
What parts to your need for your Cadillac? Need a part to get it running or just to tidy things up a bit? Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue
Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!
Started by Jason Edge in General Discussion. Last reply by Cees de Bunje Jul 22. 10 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
