Tags:
Should be showing some skin when ya that position.
Back home with the 63 Caddy. This car lived its life in the Cincinnati area and bought it from two brothers who inherited the car from their dad who drove it briefly, who inherited it from their grandfather who had driven it until the 80's Car is a Series 62 but has some cool stuff like Controlled (Posi) rear end, really cherry tilt steering wheel and dash pad, and other goodies.
My brother Randy and I had a great time in Cincinnati and went into the city last night and had a blast. This has been the 3rd 500 mile trek in a row in which he has joined me and while it seems I have to travel farther and farther to find parts cars (they were literally being dumped in my driveway 20 years ago), these trips to different areas of country have been a lot of fun and it has been great to spend time with my brother on these treks. Look for more on this latest Cadillac Adventure in the next Chapter Newsletter.
I've been looking at the pics Jason, and it would seem, much to my dismay, that the 63 has little window winders/cranks for the quarter glass/vents.
WOW, ya got windows that have to be hand cranked...... insert disgusted look here.
THAT..... would NEVER HAPPEN in a Fleetwood. :-) LOL
...and not on Dino. Of course Dino is in an advance state of Cadillac-ica.. having the power vents, 4 horn set-up and controlled (read Posi) rear end for those mind-numbing 2 wheel burnouts that leave the Fleetwood's shaking their cylinder heads! Yeah, Baby!
Yes, sadly, I have a one legged diff..... called a peg legger in Australia.
But Fleetwood owners don't hoon about either.
Travis J. Hensley Online
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion 21 minutes ago. 0 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 6 hours ago. 1 Reply 0 Likes
Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark 14 hours ago. 13 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Started by Bobby Brown in General Discussion. Last reply by Logan Robb 21 hours ago. 2 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by