'63 Eldorado trumpet horn + 2 standard horns restoration
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son contacted and sent our horns off to. I was completely surprised and amazed at the brand new appearance of the horns, but mostly the SOUND of them! They rebuild the horns so you get the original horns restored and all the part numbers are still correct. I am attaching a link to their website and a photo of our finished product installed. We are quite pleased with their service and restoration of our horns.
Company contact info:
The Horn Works
Restoration Specialist of Collector Car Horns
967 Hackett St. Beloit, WI. 53511
608-361-0095
Gary Steinkellner
Mon- Fri 9 - 4 Sat 9 - 1 CST
Est 2002
Website link:
Comment
-
Comment by Jason Edge on November 15, 2023 at 10:49am
-
Les, Thanks for sharing. I have added to our Parts & Service page. Great source!
Photos
Members
Forum
!964 Deville Front Bumper
Started by Patrick Westphal in For Sale. Last reply by Jason Edge 13 hours ago. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Which are best Shocks for 64 that are closest to Original in Ride Quality?
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website