Hello All.
I will be replacing the starter solenoid tomorrow (actually my mechanic will do the work, I'll just supervise). In checking the FSM electrical schematic and chapter verbiage, I don't see anything that looks like (or is referred to as) a starter Relay. It seems the Starter Solenoid serves the function and there's no separate relay. Right or Wrong?
If wrong, where is it?
Thanks
Norm
Comment
Water pump.....Nasty.
Norm, That is great news. The solenoid replacement is one of the rare things on these GM cars they actually made pretty easy to replace .. at least once the starter is removed. Just think if it was that easy to replace the water pump!
Forgot to mention: Jason: The Duralast Solenoid replacement you sold me fit perfectly and the whole process of changing it took about the same time it takes to read this post.
Thanks!
That's great news!
Job done! Starting function returned to a condition of alacrity. ONE NOTE: Because I had purchased and installed a complete custom fabricated exhaust system, the crossover pipe was made a little short, which resulted in our needing to detach the left and right intermediate pipes from the manifold and pull them down a bit in order to remove the (original) starter. The actual swapping out of the Solenoid was as represented: easy.
Norm
Read it. Got it. Thanks!
Starter Solenoid serves the function. The large battery cable connects to solenoid switch as does the blue "switched" wire from the ignition switch. For a full description of the 63/64 Cadillac Starting System Basics I just posted a write-up I had meant to add to the Help Page way back. Here is a link: http://6364cadillac.ning.com/forum/topics/starting-system
Started by Patrick Westphal in For Sale. Last reply by Jason Edge 12 hours ago. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website