ccp kit
tosh put the ccp kit on my 1963 caddy last year.their are 2 of them,one for stock one for larger wheels thru opgi I bought the stock wheels.master cyl.,rotors,spacers,and everything you need.i love them stop nice and straight,no more adjusting .me and a friend put in.only problem I had I lost a spacer that sit in master cyl.they had to send me a new one ,took couple of days.carefull when removing master cyl. out of box
Replies to This Discussion
-
Permalink Reply by Tosh Dickenson on
-
Thanks for the info. Do you happen happen to have the part number for the kit you bought? OPGI was adamant that their CPP kits would not fit stock wheels!
-
-
Just talked to OPGI again and they are adamant that the CPP kits do not fit the stock rims.
I did get the latest Kanter catalog in the mail and they list a kit for $1,129 and it states it fits the stock rims. I sent them a note to ask for confirmation and see who manufactures the kit.
Photos
Members
Forum
Cool Item from Batch of Parts I Just Picked Up
Started by Jason Edge in General Discussion. Last reply by Logan Robb 5 hours ago. 3 Replies 0 Likes
I recently picked up a rather large batch of parts from a contact that has sold their 63 and had left over parts. Here was one item I pulled that make me smile - a 1963 Indiana License Plate. For…Continue
Hot Start/Ignition System Overhaul 1964 Fleetwood
Started by Logan Robb in 1963/64 Cadillac Specific Discussion 5 hours ago. 0 Replies 0 Likes
I noticed this issue at the end of last summer/fall, but it seems to be getting worse as I have begun driving for the season again. When I drive the car and get everything good and warmed up, if I…Continue
T3 Headlights
Started by Jeff Donaldson in General Discussion. Last reply by Jeff Donaldson 16 hours ago. 3 Replies 0 Likes
Has anyone bought new oem headlights from Lectric Limited? They want $150 for a set of new remanufactured ones. Any advice would be appreciated.JeffContinue
Blog Posts
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
'63 Eldorado trumpet horn + 2 standard horns restoration
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
ContinueEvents
© 2024 Created by Jason Edge.
Powered by
