I recently picked up a rather large batch of parts from a contact that has sold their 63 and had left over parts. Here was one item I pulled that make me smile - a 1963 Indiana License Plate. For extra cool point s it has A 64 as part of the numbers. Being a NC resident I have several 1963 and 1964 original plates which we can use on the car, as long as we keep the real plates & registration in the car. Unlike some states, NC does not link the vintage plate to the new plate ... which means I would love to hop out on one of those toll express lanes in Texas! Ha Ha. 

Not sure if I will hang this on the garage wall or part ways and let a 63 Cadillac Owner take it. We only have a few Indiana Chapter Members, but this would look cool restored.  For now it will go up on my wall with my other plates.

Views: 84

Reply to This

Replies to This Discussion

Very cool! I keep original 1964 Illinois plates on my car! They are purple. 

I actually have two sets of 64 Illinois plates. The set I use for shows is a NOS set that was never used in the original envelope from the SOS office. Ill have to post some photos on here when I dig them out again. 

We just moved into a new home, I tries really hard to keep all my 64 stuff in one spot!

 We need to do a "Show Your Plate" Thread!

This sounds like a great idea! I'll see if I cant find my NOS plates tomorrow...

Will repost to the "Show Your Plate" when it's up. About 21 years ago I registered my car as an antique and received my specialty plates from the State of Texas (pic below). I was not thrilled with look of those plates so decided to try the find some year of manufacture plates which are legal to be registered to antique or classic cars here. I bid on 2 different sets of 1963 Texas plates hoping I might win one set. I wound up winning both sets. The best set was fresh from the prison factory still in package with the paper in between them (pic below). I think I paid $20 for one set & $25 for the other. Boy have things changed! It looks like "virgin" plates are going for 10X that these days.

Antique plate

YOM plate separator paper

I'll take that plate when you do decide to let it go. 

 Looking on the garage wall I already had a few other out of state plates so it made sense to add it to the collection. I am going to start another license plate thread and may eventually post a few of the others. 

RSS

Photos

  • Add Photos
  • View All

Forum

1963/64 Cadillac Starting - Cranking System Basics

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks 18 minutes ago. 12 Replies

I have had this info written up for some time and meant to post so here it is. I will link to this from our Help Page:1963/64 Cadillac Starting - Cranking System Basics Wiring You have a positive…Continue

Why is the air stream of my 1964 CC system weak-even though the blower is blowing strongly?

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 10 Replies

Hello AllI may have posted this before, but I was distracted by health issues and am now just getting back to trying to figure this out: The air stream (whether heat/def/AC) is weak, even thought I…Continue

Dino's Gas Lines Removed - Clean Up or Replace --> Member Advice

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Friday. 8 Replies

As part of my undercarriage cleanup and and restoration of my 64 Coupe de Ville 'Dino', I removed both gas lines (my car has AC so it has a 5/16" supply line and 1/4" vent return line) to gain better…Continue

Jason's Escalade

Started by Marty Smith in General Discussion. Last reply by Jason Edge on Friday. 2 Replies

 Cadillac Museum and Research Calendar  I get to look at Jasons Escalade all month at work !  Great Photo…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service