Logan Robb's Discussions (234)

Discussions Replied To (167) Replies Latest Activity

"Is there really a difference? As long as I put both the same on each side, would it…"

Logan Robb replied Mar 18 to Brake wheel cylinder bore

9 Mar 19
Reply by SK

"Phil,  Thats where I intend to order my parts from. But there are two bore sizes for…"

Logan Robb replied Mar 18 to Brake wheel cylinder bore

9 Mar 19
Reply by SK

"This is good advise!  I purchased complete backing plate sets from Jason some time a…"

Logan Robb replied Mar 16 to Brake wheel cylinder bore

9 Mar 19
Reply by SK

"Thank you! I had the car out and drove about 50 miles yesterday, the weather was GRE…"

Logan Robb replied Mar 16 to Rear Main Leak?

5 Mar 16
Reply by Dennis P. DiBari

"https://youtube.com/shorts/m_fcmOMe-eo?si=9GwQZy8c95aE3bt5"

Logan Robb replied Mar 14 to Rear Main Leak?

5 Mar 16
Reply by Dennis P. DiBari

"I can confirm that my 64 Fleetwood did NOT have this welded on plate. I was just und…"

Logan Robb replied Mar 2 to Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!

6 Mar 3
Reply by Jason Edge

"Magic, thank you!"

Logan Robb replied Feb 27 to Dino Diaries - Feb 25, 2025 - Open Up and Say Ahh!

5 Feb 27
Reply by Logan Robb

"Rust-Oleum 363567 Black Automotive Body Paint Type, 11 oz - Walmart.com This stuff?…"

Logan Robb replied Feb 27 to Dino Diaries - Feb 25, 2025 - Open Up and Say Ahh!

5 Feb 27
Reply by Logan Robb

"Jason, Is most of the engine bay painted with Rustoleum Gloss Black Engine paint?"

Logan Robb replied Feb 27 to Dino Diaries - Feb 25, 2025 - Open Up and Say Ahh!

5 Feb 27
Reply by Logan Robb

"The more items you add that are CAD plated, the more I want to see a WHOLE 64 Cadill…"

Logan Robb replied Feb 27 to Dino Diaries - Feb 22, 2025: Go for the Gold!

2 Feb 27
Reply by Jason Edge

RSS

Photos

  • Add Photos
  • View All

Forum

Website Header - Experimenting with Rotating Member Cars

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 5 Replies

I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue

Quick weekend project

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 1 Reply

Looking to replace the belts and rad hoses. anyone have the part numbers for a 1964 Fleetwood w AC? thanks! Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 6 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Techniques for replacing pinion seal on differential

Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 5 Replies

My 63 Park Avenue has a leak at the differential.  My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket.  I also…Continue

Tags: Replacement, Seal, Pinion

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service