Convertible bumper jack
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
There should be clips in each end inside the opening as seen in my picture below. If yours are missing I have plenty along with the screws that attach them.
-
Permalink Reply by Logan Robb on
-
Jason, are the wooden blocks a factory component? Mine also came with the black wood block for the tire block.
It is mega hot here this week. Perhaps repainting my bumper jack is something easy I can accomplish this week......
-
Permalink Reply by Alan Clark on
-
I believe all Cadillacs of the 60s and 70s came with those black-painted triangular blocks of pine. They did in my 67, 69, and 70 cars. I plan to take the dimensions off those and prepare a block for this 1964 car which is missing the block.
-
-
Did they come with one or two wedge blocks ?
-
-
One block in each of my cars - except the 64.
-
-
63's and 64's had one block.
-
-
Thatd be great! I think I have mine kicking around here somewhere. Let me know what the dimensions of yours is. I think mine was split in two it was so dry. Id like to remake mine as well.
-
-
Measurements of the block in the trunk of my 69 Cadillac:
Picture a right triangle:
Base = 3 1/2"
Height = 5 3/4"
Hypotenuse = 6 5/8"
The block is 3 1/2" thick, so if looking down on the base, you'd see a 3.5" square.
The block in my 67 Cadillac also is made of pine painted black, but the dimensions are a fraction of an inch different.
-
-
This is excellent! Thank you!
I shall remake mine as well
-
Permalink Reply by Kurt on
-
Thanks for this timely post. I forgot about the black wooden block that used to be in my trunk. Not sure where it is now. I recently finished a fence project & had a 6" scrap of 4X4 left over so I just made another with the dimensions you provided. I wish all my car projects were this easy.
-
-
It looks great, but the animated picture is spectacular. The talent in this group is impressive.
-
-
Thanks for the picture. I will investigate.
Photos
Members
Forum
Take heads off for rebuild
Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 15 hours ago. 3 Replies 0 Likes
Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue
Headlight conversion
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill Jul 27. 2 Replies 0 Likes
I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue
What parts do you need for your Cadillac?
Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies 0 Likes
What parts to your need for your Cadillac? Need a part to get it running or just to tidy things up a bit? Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue
Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!
Started by Jason Edge in General Discussion. Last reply by Cees de Bunje Jul 22. 10 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
