My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?

Views: 335

Reply to This

Replies to This Discussion

There should be clips in each end inside the opening as seen in my picture below. If yours are missing I have plenty along with the screws that attach them. 

Jason, are the wooden blocks a factory component? Mine also came with the black wood block for the tire block. 

It is mega hot here this week. Perhaps repainting my bumper jack is something easy I can accomplish this week......

I believe all Cadillacs of the 60s and 70s came with those black-painted triangular blocks of pine.  They did in my 67, 69, and 70 cars.  I plan to take the dimensions off those and prepare a block for this 1964 car which is missing the block.

Did they come with one or two wedge blocks ?

One block in each of my cars - except the 64.

63's and 64's had one block.

Thatd be great! I think I have mine kicking around here somewhere. Let me know what the dimensions of yours is. I think mine was split in two it was so dry. Id like to remake mine as well. 

Measurements of the block in the trunk of my 69 Cadillac:

Picture a right triangle:

Base = 3 1/2"

Height = 5 3/4"

Hypotenuse = 6 5/8"

The block is 3 1/2" thick, so if looking down on the base, you'd see a 3.5" square.

The block in my 67 Cadillac also is made of pine painted black, but the dimensions are a fraction of an inch different.

This is excellent! Thank you! 

I shall remake mine as well

Thanks for this timely post. I forgot about the black wooden block that used to be in my trunk. Not sure where it is now. I recently finished a fence project & had a 6" scrap of 4X4 left over so I just made another with the dimensions you provided. I wish all my car projects were this easy.

It looks great, but the animated picture is spectacular.  The talent in this group is impressive.

Thanks for the picture.  I will investigate.

RSS

Photos

  • Add Photos
  • View All

Forum

October, November, December 1962 Serviceman Bulletins Rescanned & Uploaded

Started by Jason Edge in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Some time back I started rescanning the Serviceman Bulletins starting with October 1962 and the October Supplement as it was the month the 1963 Cadillac was introduced. I scanned November and let…Continue

Ignition Resistor Wire Purpose, Ignition Switch Circuit

Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Sunday we had a very detailed discussion in our Zoom meet-up on the resistor wire and the cranking and ignition system, I consulted ChatGPT and gave it the 1963 Shop manual and asked (prompted) with…Continue

63 Coupe de Ville Interior Wiring Diagram

Started by Robert Schles in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 3 Replies

The interior wiring is spread out among a few different schematics. I combined them into one drawing. I hope it can help someone troubleshoot the intermittent interior lighting and those pesky door…Continue

An AI Enhanced Logo Upgrade.

Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari Sep 10. 6 Replies

I have been having some fun with ChatGPT recently and decided to have a quick go at our old "back of shirt" logo. In about 5 minutes I came up with what you see below. I thought it was impressive.…Continue

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments

Hi Robert,

     I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service