My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?

Views: 365

▶ Reply to This

Replies to This Discussion

There should be clips in each end inside the opening as seen in my picture below. If yours are missing I have plenty along with the screws that attach them. 

Jason, are the wooden blocks a factory component? Mine also came with the black wood block for the tire block. 

It is mega hot here this week. Perhaps repainting my bumper jack is something easy I can accomplish this week......

I believe all Cadillacs of the 60s and 70s came with those black-painted triangular blocks of pine.  They did in my 67, 69, and 70 cars.  I plan to take the dimensions off those and prepare a block for this 1964 car which is missing the block.

Did they come with one or two wedge blocks ?

One block in each of my cars - except the 64.

63's and 64's had one block.

Thatd be great! I think I have mine kicking around here somewhere. Let me know what the dimensions of yours is. I think mine was split in two it was so dry. Id like to remake mine as well. 

Measurements of the block in the trunk of my 69 Cadillac:

Picture a right triangle:

Base = 3 1/2"

Height = 5 3/4"

Hypotenuse = 6 5/8"

The block is 3 1/2" thick, so if looking down on the base, you'd see a 3.5" square.

The block in my 67 Cadillac also is made of pine painted black, but the dimensions are a fraction of an inch different.

This is excellent! Thank you! 

I shall remake mine as well

Thanks for this timely post. I forgot about the black wooden block that used to be in my trunk. Not sure where it is now. I recently finished a fence project & had a 6" scrap of 4X4 left over so I just made another with the dimensions you provided. I wish all my car projects were this easy.

It looks great, but the animated picture is spectacular.  The talent in this group is impressive.

Thanks for the picture.  I will investigate.

RSS

Photos

  • Add Photos
  • View All

Forum

lower rear control arm bushings on a 1964 Sedan de Ville

Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 23 hours ago. 2 Replies

Hello I am installing new bushings on my lower control and upper yoke arms. Does anyone have any advise or things I should be aware of in removing and installing the new bushings. Thankyou Ron PerryContinue

1964 Cadillac DeVille for Sale

Started by Jason Meyer in For Sale on Wednesday. 0 Replies

Hey everybody, I have a family owned since new 64 Cadillac model 6267 Deville Convertible I have to part with. It runs strong with a 429 V8 original engine with 90,000 miles on it. Suspension has…Continue

Tags: 1964, Convertible, Original

Take heads off for rebuild

Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Kurt Oct 3. 13 Replies

Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue

1963 Dashboard With Autronic Eye Hole

Started by Earl R in For Sale. Last reply by Earl R Oct 2. 4 Replies

I bought this from a yard in Washington state.  I was told it was pulled and kept inside as soon as the car came in. I was going to dye and install it in my '63 Eldorado but sold the car.  Please see…Continue

Tags: Dash

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments

Hi Robert,

     I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service