CLC 2018 Grand National - San Marcos, Texas, June 5-9

Host Hotel:  Embassy Suites by Hilton San Marcos
1001 E. McCarty Lane, San Marcos, TX 78666, 512-392-6450
Backup Hotel:  Courtyard by Marriott in San Marcos.   

For more details visit cadillaclasalleclub.site-ym.com/page/2018grandnational

1963/64 Cadillac Chapter 2018 Grand National Event Page
www.2018GN.6364Cadillac.com

I have created this forum post so that members attending the 2018 Grand National
can share their pictures and stories.

 

Views: 255

Reply to This

Replies to This Discussion

Used the cool pictures of Clifford Muskus arrived at the GN in his 64 SDV for our Facebook Page cover pictures. Check it out at https://www.facebook.com/6364Cadillac/

Here is the picture...

I just did the early check in and it looks like we are in room 1021. It is toward the corner and hopefully will have a room of the show field.  For those of you already there perhaps you can let us know where the show field is in relation to the hotel and rooms?

I have changed to room 1017 which should be near the middle of the side where the car show will be held. Thanks to Chapter Member Tim Coy for emailing me the rooms I need to shoot for - 1011 to 1020.

At Raleigh Durham Airport and checked in and ready for our flight to Charlotte and then to Texas. Can’t wait to see our Chapter & CLC friends.

Checked into our room and have a great view of the show field for Saturday’s car show.

Jason

Glad you had a safe flight and got a good room and view with the help of a fellow CLC member
Enjoy your wonderful Cadillac adventure

Enjoy

We had a great Chapter meet-up. You can check out pictures on our Facebook. Page at www.facebook.com/6364cadillac

We have had a great time in San Marcos and will be returning tomorrow. There were 6 1963/64's on hand, 3 were judged, and took a LOT of pictures of the 63's and 64's and all other Cadillacs and LaSalles thru 1964.  I have posted Aerial and distant and other pictures on our Facebook page at www.facebook.com/6364cadillac and will post many more after I return. Cheryl and I stayed a couple extra days and tour downtown San Marcos and the San Marcos river today. If not a Facebook friend, be sure to "friend" me and you can follow our shenanigans!
As of yesterday I am now offically back on the CLC Board as an elected Board Member and look forward to representing our Chapter & Website with a seat  "at the big table" during the next couple of years!  Looks like you guys have been holding down the fort here on the site and it is appreciated!  We fly in after midnight Wed, June 13 and will be ramping back up and putting to gether our Grand National newsletter after that. Jason.

Jason

Sounds like a wonderful enjoyable time In Texas with the wife
Congragulations on being a member of the board again
Why do i think you will be running the entire place very soon
That would be ok with me

Enjoy

Looks like I have a couple hundred car show pictures from the 2018 CLC Grand National to go thru when I get home. Here is a fin-tastic 1961-64 Group Shot.

The name tags on everyone is a top idea.

Too many beers and end up as full as high school hat rack and at least you still know who you are..... as long as you can read upside down.

Thanks for the pics so far Jason. (Facebook)

83 Pictures of the 1963/64 Cadillacs at the 2018 CLC Grand National have been posted to an album on our Facebook Page which you can see by Clicking Here.  Below is one of the group shots of the 6 1963/64's on hand.

RSS

Photos

  • Add Photos
  • View All

Forum

1963 Ignition Bezel

Started by Lee Martin in 1963/64 Cadillac Specific Discussion 48 seconds ago. 0 Replies

Looking for a good ignition lock nut bezel for 1963!  This is the chrome piece that holds the ignition housing in place and protects painted dash from key scratches.  Opening must be more than 15/16"…Continue

Floor Pans

Started by Tommy Nicolosi in Restoration Discussion 33 minutes ago. 0 Replies

Are the floors on 1961-1964 the same???Continue

Back to Starter

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 1 hour ago. 39 Replies

Ok,  short refresher,  last dec i relpaced starter w rebuilt from usa parts.  and even then,  after short runs where i got up to temp, if i shutvcar off, and then tried to start, it would drag…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 3 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

HVAC Vacuum Valve Clip-need the one for the Power Control side

Posted by Norman Silverman on September 17, 2018 at 8:15pm 6 Comments

Hi.

Update:

I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy…

Continue

7 vacuum valve-need a good one or someone to recondition mine

Posted by Norman Silverman on September 15, 2018 at 5:44pm 12 Comments

So, I've put my 7 vacuum valve from the control head side to the test, and it failed. I looked at the instructions for re-conditioning it and unless I am missing something, the instructions are missing something (about how to take off the clip that provides the tension that holds the two pieces together). 

In any case, I can't do this particular repair so I am looking for a new valve (not likely), or a good re-conditioned one, or someone who has done this before and would do mine for…

Continue

Mosiac Cadillac emblem Table

Posted by Dana G Cooper on August 30, 2018 at 10:48pm 11 Comments

Wanted to share a picture of a table my wife made for me to display with our 63 Coupe Deville. 

Inside door handle thread size

Posted by Michael Jarnagin on August 23, 2018 at 4:31pm 1 Comment

Anyone know the thread size on the inside door handle bolts mine are missing any info much appreciated 

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service