Wayne Morris's Discussions (33)

Discussions Replied To (25) Replies Latest Activity

"Yesterday I installed the windshield washer pump kit, I primed it and it worked! I d…"

Wayne Morris replied Jan 15 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"Once I get the rebuild kit installed, I'll let you know how I made out. Wayne"

Wayne Morris replied Jan 11 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"Already have checked the fluid. It was good clean fluid and the screen was clear. Th…"

Wayne Morris replied Jan 10 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"I tried priming the pump but no luck, I got a little fluid into the pump body but it…"

Wayne Morris replied Jan 10 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"I have ordered  a windshield washer pump rebuild kit from Caddy Daddy and should rec…"

Wayne Morris replied Jan 10 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"I did use a smaller studded fastener on one door but it did not seem as secure when…"

Wayne Morris replied Jan 7 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"I could could not get the proper clips for the door side moldings. I got some used b…"

Wayne Morris replied Jan 7 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"Thank you once again Wayne"

Wayne Morris replied Dec 14, 2024 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"Jason, thank you for clarifying how the clips are located and how they work. Very he…"

Wayne Morris replied Dec 14, 2024 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"are these clips used for the center three holes of the door molding/"

Wayne Morris replied Dec 12, 2024 to Fender Trim Removal

6 Dec 12, 2024
Reply by Jason Edge

RSS

Photos

  • Add Photos
  • View All

Forum

Trivia #33 - What % of 1963 Cadillacs Came with Limited Slip (Posi) Differential Rear End

Started by Jason Edge in Trivia. Last reply by Phillip Hill 1 hour ago. 2 Replies

It has been way too long since we posted any trivia (and gave out a cigar), so here is one I thought I might have posted but do not see it: What % of 1963 Cadillacs came with the optional "Controlled…Continue

1963 Coupe de Ville Located in NC For Sale

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 2 Replies

I had an older couple contact me indicating they are selling their 1963 Coupe de Ville they have had for 40 years and they are located Moyock, NC, which is in the very north east part of North…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Thursday. 15 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Back to Basic Header, Lots of Cad to Sort, Etc.

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

I hope our US members had a great Thanksgiving and all members are ready for the holiday season. You probably noticed we went back to a more basic header on the website (in desktop mode).   I had…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service