Windshield washer pump inoperative
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have switched parts around with. The diaphragm is in good condition, The only idea I have at this point is that the seal around the valves is leaking. I tried to coat the seal with Vaseline but no difference.
Any ideas where to go next?
Does any body out there have any idea if the seal is available anywhere?
- Attachments:
-
-
Windshield washer pump.jpg, 155 KB
-
Replies to This Discussion
-
Permalink Reply by Wayne Morris on
-
Once I get the rebuild kit installed, I'll let you know how I made out.
Wayne
-
Permalink Reply by Dennis P. DiBari on
-
Wayne,
If it is the W/W pump piston itself, I also have a rebuilder who is great. Jason's contact is a great recommendation!
Dennis DiBari
-
-
Yesterday I installed the windshield washer pump kit, I primed it and it worked! I did have to clear nozzles and replace the lines to them but all is working now.
Thanks all who contributed.
Wayne Morris
-
-
Great news Wayne!
Dennis DiBari
- ‹ Previous
- 1
- 2
- Next ›
Members
Forum
1957 1958 1959 1960 Cadillac Eldorado Trumpet Horn 1999940 restored
Started by Doug Scarrow in For Sale 11 hours ago. 0 Replies 0 Likes
Rare correct Restored 1957,1958,1959,1960 Cadillac Eldorado Delco Type "S" Trumpet Horn part # 1999940 completely restored and extremely LOUD and clear . This is the horn that gives the train sound…Continue
Website Header - Experimenting with Rotating Member Cars
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Tuesday. 6 Replies 3 Likes
I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue
My Only Eldorado Parts Car - A 1963 Picked up in 2001
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Monday. 2 Replies 0 Likes
I was thumbing thru parts car folders and run across the 63 Eldorado I parted out way back in 2006 and saw the dirty but good condition body tag. I like to clean them up I guess as a token and of…Continue
Anybody in Reno or Lake Tahoe area?
Started by Mack in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies 0 Likes
We have a group of Cadillac guys in Reno/Tahoe area and we will be cruising and participating in the local car shows this season!let me know if you’re in the area and wanting to join in.happy…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
