1964 TH400 Torque Converter?
Hey guys! I’m back with another question lol. I noticed some vibration under acceleration while not moving that I suspect may be coming from the torque converter, so I’m looking to replace it while I have my engine out. Seems like a good idea, but I’m having trouble locating a new or rebuilt converter. I found this one below (link) at AutoZone that says it fits my 1964 Cadillac Deville (429 engine w/TH400 trans) however while reading the description it states for flat top bell housing, but my TH400 is round. Does anyone have any thoughts on this or can provide a part number?
https://www.autozone.com/drivetrain/transmission-torque-converter/p...
Replies to This Discussion
-
Permalink Reply by Jacob Foster on
-
FYI guys - this torque works! Just thought that I’d share the feedback in case anyone else comes across this issue. The new torque converter does have 6 lugs, whereas the original only had 3…spoke with the rebuilder and they confirmed that it would work. It did. I used 3 of the 6 lugs to bolt up to my original flywheel.
Photos
Members
Forum
A Big Welcome to the 63/64 Cadillac Chapter to my Brother Randy
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Randall (Randy) Edge yesterday. 2 Replies 0 Likes
My brother Randall (Randy) Edge has been helping me off and on for many years with traveling to pick up parts cars all over the east cost, to almost anything and everything I need help with around…Continue
Frost plugs
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Saturday. 5 Replies 0 Likes
Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue
Trivia Question #37: A Jiggy Car Frame Tool!
Started by Jason Edge in Trivia on Saturday. 0 Replies 0 Likes
Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue
Trivia #36: NUTTY Fastener Trivia
Started by Jason Edge in Trivia. Last reply by Jason Edge on Saturday. 1 Reply 0 Likes
Ok. Here is a fastener I see about every day working with my big inventory of fasteners, and thought it was worth posting as trivia. If you saw my post on Facebook (I do sell them), wait to see if…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
