1964 TH400 Torque Converter?
Hey guys! I’m back with another question lol. I noticed some vibration under acceleration while not moving that I suspect may be coming from the torque converter, so I’m looking to replace it while I have my engine out. Seems like a good idea, but I’m having trouble locating a new or rebuilt converter. I found this one below (link) at AutoZone that says it fits my 1964 Cadillac Deville (429 engine w/TH400 trans) however while reading the description it states for flat top bell housing, but my TH400 is round. Does anyone have any thoughts on this or can provide a part number?
https://www.autozone.com/drivetrain/transmission-torque-converter/p...
Replies to This Discussion
-
Permalink Reply by Jacob Foster on
-
FYI guys - this torque works! Just thought that I’d share the feedback in case anyone else comes across this issue. The new torque converter does have 6 lugs, whereas the original only had 3…spoke with the rebuilder and they confirmed that it would work. It did. I used 3 of the 6 lugs to bolt up to my original flywheel.
Photos
Members
Forum
64 convertible interior lamps
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Robert Schles 1 hour ago. 2 Replies 0 Likes
Question: Do different interior lamps illuminate depending on whether you open the driver or passenger door? Background: In my '67 DVC, ALL the interior lamps come on when I open either door in the…Continue
RIP Dolly
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 2 Replies 0 Likes
Material for making staples for rubber splash shields
Started by Marty Smith in 1963/64 Cadillac Specific Discussion Aug 23. 0 Replies 1 Like
Here is the link to Mcmaster Carr for Staple material as discussed in the latest Zoom meeting. https://www.mcmaster.com/6517K24/ Not 100…Continue
Looking Back 15 Years Ago - Dino at Classics at the Capital
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari Aug 23. 1 Reply 0 Likes
Here is a short video of me cutting up with Dino 15 years ago. It popped up in my memories a couple days ago and thought I would share here. This was taken before we headed downtown Raleigh NC to the…Continue
Blog Posts
Authenticity Manual
Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes
Hi Robert,
I emailed you more pictures for the Authenticity Manual.
Dennis DiBari
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2026 Created by Jason Edge.
Powered by
