2 clocks that work
All, a while ago I purchased a set of 4 clocks from Jason that he had on the shelf. I have had some experience in the past repairing clocks, and I was able to get 3 of those four operational. One I needed for my car, but I have two more that work and keep good time. Here is my offer, if you would like one for your vehicle contact me at pat.westphal@gmail.com, and we can do an exchange. You send me your clock - one that is simply not working (you know not in pieces) and I'll send you one of these clocks that work. Then I will try to fix the clock you sent me and if successful offer that one for someone else. I know that an operating clock is not a big deal in the overall scheme of what we are all doing on our vehicles but it is kind of cool to have one that works. Happy motoring.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
This is a great deal. Anyone here need a clock that works? Pat is giving you one for free if you send a complete core. You can't beat that deal with a stick!!
-
Permalink Reply by Mark Bartlett on
-
Hi Patrick I sent my clock to you today let me know when you get it
Photos
Members
Forum
Original ‘64 Cruise Installed.
Started by Michael Vogler in General Discussion. Last reply by Dennis P. DiBari 44 minutes ago. 1 Reply 0 Likes
Finally got the original factory cruise control in my ‘64 Deville fully installed. It works! (After considerable effort and expense 😳)Thinking about installing the original auto-dim headlights next…Continue
A Big Welcome to the 63/64 Cadillac Chapter to my Brother Randy
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Randall (Randy) Edge on Wednesday. 2 Replies 0 Likes
My brother Randall (Randy) Edge has been helping me off and on for many years with traveling to pick up parts cars all over the east cost, to almost anything and everything I need help with around…Continue
Frost plugs
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari May 23. 5 Replies 0 Likes
Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue
Trivia Question #37: A Jiggy Car Frame Tool!
Started by Jason Edge in Trivia May 22. 0 Replies 0 Likes
Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
