Door lock vacuum
Hey folks. First post. I hope I'm doing it right. I currently restoring a 1964 Fleetwood 60 series Special. There is an egg shaped vacuum canister on the left side of the firewall behind the tire. It has a vacuum fitting with two connections. I am thinking one connects to a hose going inside the car. Where does the other hose go?CaddyVacCanPwrDoorLock.jpg
- Attachments:
Replies are closed for this discussion.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
It T's into the line that goes into the vacuum fitting on back of intake. This is it's vacuum source. Here is a picture of the power door lock & power trunk tank showing the feed hose going thru fire wall then the other shoots to the passenger side and T's into that fitting on the back of the intake.
-
-
Permalink Reply by Bill Hatfield on
-
If it were not for you Jason, I'd go back to building old Mustangs .. Thanks
-
Photos
Members
Forum
Rescan of November 1962 Serviceman Bulletin Uploaded
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
Back in November I started rescanning the Serviceman Bulletins as a…Continue
Dino Undercarriage Restoration Continues Rearward at the Frame to Body Support Flat Braces
Started by Jason Edge in Restoration Discussion on Sunday. 0 Replies 1 Like
After making a decent start on cleaning up a section below right rear area of my my 64 Coupe de Ville - Dino's undercarriage, I have been slow to make more progress but in the last couple of days…Continue
1964 Cadillac wagon by Victor Body Works
Started by john w. warner in For Sale. Last reply by Logan Robb on Friday. 2 Replies 1 Like
Its on Hemmings.Needs work!Continue
1963 Cadillac Fleetwood 60 Special Eyebrow Molding
Started by Stephen Pechenik in Restoration Discussion. Last reply by Russ Austin Jan 21. 6 Replies 0 Likes
I am readying my Fleetwood to be painted. I need to replace the driver's side left chrome eyebrow molding (below the headlights). It appears to be made from pot metal. Mine is broken and I need to…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
-
February 15, 2026 - 63/64 Cadillac Chapter Zoom Meet-Up
February 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by
