Just wondering if anyone knows of a place to get interiors done in the Pacific Northwest. I'm looking at seats, door cards and headliner. I live in the Tacoma Washington area so west side is preferable .  appreciate any help.  

Facebook Facebook

Views: 312

Reply to This

Replies to This Discussion

Best to go to cruise ins and talk to people. Find out where they go and who is known for a good job.

That's Russ, thats tough this time of year in the PNW as its not cruise season. Everyone hibernates up here and works on their cars. 

Best to go to cruise ins and talk to people. Find out where they go and who is known for a good job.

Check out and join a Cadillac LaSalle Club (CLC) region in your area.   They will be an invaluable resource for networking and finding local recommendations. Here is one I see on the list of CLC regions in WA state on the Chapters & Regions page at https://www.cadillaclasalleclub.org/general/custom.asp?page=regions... :

PACIFIC NORTHWEST (1966)
Robert A. LeCoque
P.O. Box 3025
Renton, WA 98056-5025
(206) 799-6585
rLecoque@msn.com
WEBSITE

If into a member of the CLC join them at www.cadillaclasalleclub.org/join    They currently have a free 6 month free membership deal through now and the end of the year!

Thank you Jason, I will look into that 

try these guys they supposedly took over from the guy that did a great job on mine many years ago. it looked factory correct when I got it back including the crests embossed in the leather.The company is -- Texas Auto Upolstery --in Vancouver Washington
The new owner is --Emilio @ 360 771 3565

Thank you Maurice I will look them up. 

RSS

Photos

  • Add Photos
  • View All

Forum

Bleeding brakes

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 54 minutes ago. 4 Replies

I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue

Power steering fluid

Started by Bobby Brown in General Discussion. Last reply by Tony Prichard 59 minutes ago. 7 Replies

My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue

1963 AC evaporator core leaking?

Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton yesterday. 2 Replies

Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue

Tags: 1963, core, evaporator, AC

seat foam replacement

Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles yesterday. 3 Replies

does anyone out there have any experience with seat foam replacement on  a 63/64 Cadillac.  I had my seats reupolstered  many years ago in original leather/fabric and they still look great, but the…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service