Hello All! I’m struggling to find an answer to this question, hoping a member can help. Can I swap the crankshaft from a 1966 429 w/TH400 to my 1964 429 w/TH400 trans? I came across an article that said that the flywheels are the same but the bolt spreads are slightly different. If that is the case, can I swap the flywheels too. I do have both flywheels.

Backstory: I rebuilt the engine recently after it sat for 30-40 years, then drove the car about 4 miles and spun the #8 rod bearing. Now the engine is back on the stand. I pulled the crank last night and see damage on the journals. It’s going to need to be replaced or turned again. My heart is broken, but my will is not! Any feedback you guys would be willing to share would be greatly appreciated. Thanks -Jacob

Views: 96

Reply to This

Replies to This Discussion

As far as crankshafts I can only confirm that the Master Parts Book lists a different crankshaft between 64-65 vs 66-67. I am not sure what the difference is.

If you cannot find a crankshaft I can put you down for one on my Wait List. I would also post a listing here in our Wanted forum for a 1964-65 429 Turbo Hydramatic Crankshaft.

Keep in mind there were 2 crankshafts in 1964, one for the Hydramatic equipped cars (Series 62, 75 Series, Comm. Chassis), and one for Turbo HydraMatic equipped cars (deVilles & Fleetwoods).  I'm guessing you already knew that but you definitely want the THM version if pulled from a 1964 Cadillac.

Thank you for the feedback Jason! I found that the connecting rods, rod bearings, and main bearings all appear to be the same from 64 thru 66, so I’m wondering what could be different about the cranks between those years. Perhaps it’s just the bolt spreads on the flywheels.

I have a crank for you if the shop determines yours in not repairable. 

Awesome, thank you Russ! How much would charge with shipping to Spring Hill, FL (Tampa area)

Whats the zip code?  Please email me at russ@thecadishack.com if you are interested.

RSS

Photos

  • Add Photos
  • View All

Forum

1963 & 1964 Equipment Percentages

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 7 hours ago. 3 Replies

Here is a list of equipment percentages I had pulled from the Ward Automotive Yearbooks for 1963 and 1964 and have used for several trivia questions. I thought I would share the entire list as seen…Continue

!964 Deville Front Bumper

Started by Patrick Westphal in For Sale. Last reply by Jason Edge on Monday. 1 Reply

Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell.  If you are looking for these contact me and we will talk about it. …Continue

Which are best Shocks for 64 that are closest to Original in Ride Quality?

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman on Sunday. 5 Replies

Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue

1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply

Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service