I have an issue with my left side lower bulb in the bumper end housing portion. The bulb that operates the backup light. I can't get a bulb to operate although I do get 12V when I put my tester to that center pin inside the bulb housing. I even added some solder to the tip of the bulb contact to see if the buidup would help contact, but no go. The bulb does take a bit of effort to insert as if it is contacting the spring loaded pin.
Dan
Tags:
U had this same issue and messed with the socket for a long time, but could not get it to work consistently - the spring at the base was just too old and had lost its springiness. I replaced the socket and all was well. I documented the process at the link below - it is really pretty easy and actually took much less time than I had spent fiddling with the original socket.
http://6364cadillac.ning.com/forum/topics/1963-tailight-backup-ligh...
Started by Jason Edge in Trivia. Last reply by Jason Edge 7 hours ago. 1 Reply 0 Likes
What % of 1963 and 1964 Cadillacs came with the optional "soft ray" tented glass? 1963 & 1964 were very close, so if you get one you will get the other. Need to get it within 3%. So, who will…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 14 hours ago. 3 Replies 0 Likes
It has been way too long since we posted any trivia (and gave out a cigar), so here is one I thought I might have posted but do not see it: What % of 1963 Cadillacs came with the optional "Controlled…Continue
Started by Jason Edge in For Sale. Last reply by Jason Edge on Friday. 2 Replies 0 Likes
I had an older couple contact me indicating they are selling their 1963 Coupe de Ville they have had for 40 years and they are located Moyock, NC, which is in the very north east part of North…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Thursday. 15 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
December 14, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by