Just going to get my valve stems seals (only) done (at this stage) but I am confused
as to what I need to buy - check the link from Rock
http://www.rockauto.com/en/catalog/cadillac,1964,deville,7.0l+429ci...
do I just need the pack of 16 rubber oring seals or do I need to buy the actual complete
valve stem seal?
http://www.rockauto.com/en/moreinfo.php?pk=216338&cc=1320297&am...
do the old complete seals deteriorate or just the rubber oring seal?
hope that makes sense!
John
Tags:
Tony
I want to do the valve stem seals with the head still on. just the seals.
I guess when they get the seals out they will see what they need perhaps?
Started by Michael Vogler in General Discussion. Last reply by Dennis P. DiBari on Sunday. 6 Replies 1 Like
63/63 Owners,The clock in my '64 just went out. It appears that the mechanical component is working properly, so I think the coil has failed. I contacted Jerry at Clockworks and he advised that he…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton on Sunday. 6 Replies 0 Likes
I’m in the midst of refreshing some things in my dash. I got my passenger ash tray working for the first time ever apparently, evident by the factory defect tag. “While I’m in here I might as well…Continue
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler on Sunday. 14 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Jason Edge in General Discussion. Last reply by Michael Vogler on Sunday. 3 Replies 0 Likes
I have been more than a bit quiet the past couple of weeks due to a really bad fall January 31 where I tore my right knee MCL ligament and ruptured the ACL Ligament. MCL will heal in time but ACL is…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by