VALVE STEM SEALS - WHICH ONES!
Just going to get my valve stems seals (only) done (at this stage) but I am confused
as to what I need to buy - check the link from Rock
http://www.rockauto.com/en/catalog/cadillac,1964,deville,7.0l+429ci...
do I just need the pack of 16 rubber oring seals or do I need to buy the actual complete
valve stem seal?
http://www.rockauto.com/en/moreinfo.php?pk=216338&cc=1320297&am...
do the old complete seals deteriorate or just the rubber oring seal?
hope that makes sense!
John
Replies to This Discussion
-
Permalink Reply by john chalk on
-
Tony
I want to do the valve stem seals with the head still on. just the seals.
I guess when they get the seals out they will see what they need perhaps?
Photos
Members
Forum
Cadmium Plated Front and Rear Bumper End Fastener Sets
Started by Jason Edge in For Sale 9 hours ago. 0 Replies 0 Likes
I will start grouping some of my fastener sets and thought I would start with the bumper fasteners. These have links that point to photo albums on my Facebook Parts Page at…Continue
Windshield washer pump inoperative
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Saturday. 14 Replies 0 Likes
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have…Continue
63 vs 64 Hood V Size Difference
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Saturday. 0 Replies 0 Likes
The 64 hood V is considerably bigger than the 63 hood V, and one of the many things I have not done in dealing with these cars on the last 3 decades was to do a direct comparison. Someone asked about…Continue
Radio Models 1963 to 1968
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies 0 Likes
I sometimes get asked what radios were used in 1963 and 1964 or verification of a radio model number, so I scanned the radio listing from a 1968 Master Parts Book that covers 63 to 68 which covers…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
Videos
© 2025 Created by Jason Edge.
Powered by
