I have updated the "Join 1963/64 Cadillac Chapter" flyer to simplify and incorporate our 2013 Best Website Badges.
Please help share with other potential Chapter and Website members by saving and either sending soft…
ContinueAdded by Jason Edge on October 7, 2013 at 7:00am — No Comments
I was just scanning through my online Edition of the October Self Starter, and reading through the Personal and Car awards and though I would share with our Non-CLC website members. Reading the website award section, I was again filled with pride to have myself and our website recognized with this prestigious national award.
I had previously posted…
ContinueAdded by Jason Edge on October 1, 2013 at 4:30pm — No Comments
Added by Jason Edge on April 16, 2013 at 4:30pm — 9 Comments
Here's a little piece I wrote up and included in the Feb 2013 Newsletter regarding what to do with those shop manuals coming apart at the seams:
Turn that “Falling Apart” Shop Manual
into an Ultimate Workbench Companion!
by Jason Edge
…
Added by Jason Edge on February 27, 2013 at 3:00pm — 8 Comments
When a certain number of replies are posted on a Message Blog or other thread it is added to another page and if you are unfamilar with how this works, might wonder what happened to your reply.
If you scroll down to the bottom of a post that is more than one page long you will see page selection options at bottom left and bottom right. On bottom left, you can click Next to go to next page, or click on the specific page #, or enter the the page number and go to it over on the lower…
ContinueAdded by Jason Edge on December 14, 2012 at 9:27pm — No Comments
I just turned on an option that allows you to customize your personal page that you see when you click on the "My Page" tab up top or someone clicks on your name.
You can customize the appearance including the header section. I just worked on mine a bit and you can get an idea of what you can do by going to my page at: …
ContinueAdded by Jason Edge on August 24, 2012 at 1:30pm — 8 Comments
From a desktop or laptop ....simply click on the tab at bottom of header above for the type of content you want to add then click '+Add' in upper right hand of screen, enter the details, then click "Add...." at bottom.
For example:
To add a forum discussion - click Forums, then click "+Add", select category…
ContinueAdded by Jason Edge on October 18, 2012 at 11:30am — 2 Comments
I just posted a new Parts Suppliers page and created a new tab up top bottom right in our website header section. I have a list from the old site I will start copying in at some point as I verify they are still valid but can add others anytime. I need the URL link to your page. If it is a Ning.com personal page I can make it a sub-tab so that it pulls up when you hover over the 'Parts Suppliers' tab.
Jason.
Added by Jason Edge on August 28, 2012 at 7:25am — 1 Comment
Hello All,
I've got a good batch of your cars picked out to spotlight in the coming weeks and invite others to submit their cars to spotlight.
If you would like your car spotlighted one week you can email me a picture or a link back to it, or just tag it as 'tospotlight' on the specific picture you want me to use. I've been tagging cars I've set aside this way but was…
ContinueAdded by Jason Edge on August 27, 2012 at 4:43pm — No Comments
Just like at the old Multiply site you can change what you receive emails for in your “personal” settings.
Added by Jason Edge on August 16, 2012 at 8:02am — No Comments
Started by Russ Austin in For Sale 9 hours ago. 0 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 11 hours ago. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 18 hours ago. 7 Replies 0 Likes
My original '64 Devile radio has been rebuild and upgraded. Can't wait to get in back in the car!https://youtu.be/DgYqoV290KwContinue
Started by Doug Scarrow in For Sale yesterday. 0 Replies 0 Likes
Just listed nice 1964 Cadillac steering wheel for tilt column https://www.ebay.com/itm/266781070358. $150 plus $25 USA shippingContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by