I just turned on an option that allows you to customize your personal page that you see when you click on the "My Page" tab up top or someone clicks on your name.

You can customize the appearance including the header section. I just worked on mine a bit and you can get an idea of what you can do by going to my page at:  https://6364cadillac.ning.com/profile/jasonedge

To get Started click on 'Settings', then 'My Page'  over on left, then 'Appearance' and you can change much of your personal page. If you mess up there are a couple of "Reset" tabs on the same settings page.

Check out my page and see what you guys can come up with. 

Jason.

Views: 257

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Jason Edge on November 22, 2013 at 8:58pm

Just bumping this up to remind everyone that you can customize your personal page here at our Ning.com hosted site following the info up top.

Comment by Jason Edge on October 3, 2013 at 6:25pm

How you change everything is up to your discretion. You will just have to try different things and see how you like it.

To change header, after you click appearance, click 'header'.  From there you can change header background and header border. In header background you can make transparent, make a solid color, or choose an image off your PC by clicking the camera icon.

Comment by Tony and Ginny 429 on October 3, 2013 at 11:04am

Jason

Once I click on  appearence , I am lost how to proceed , and somehow sure I am not alone

What are the next things I need to do to post a new header , and example as to do whats next  would help

Been trying to do this for a while

 

Comment by Jason Edge on April 20, 2013 at 4:06pm

Just bumping this up for anyone that wants to change their page.

 

Comment by Jason Edge on February 23, 2013 at 10:02pm

For a really cool page check out Chris Codd's page at http://6364cadillac.ning.com/profile/ChristopherCodd

Comment by Jason Edge on February 23, 2013 at 9:59pm

We have many new members joining up and wanted to point out that you can customize your page here on our Ning hosted website. Some of you already have some cool looking pages. You can check mine out at: http://6364cadillac.ning.com/profile/jasonedge

Comment by Jason Edge on December 8, 2012 at 9:39pm

Tony, Changing the header background is just one of many things you can peronalize on your personal page.

To change header background image on your personal page: click Settings, My Page, Appearance, Header, Header Background. It is best to have a picture about 950 resolution wide.

Comment by Tony and Ginny 429 on December 8, 2012 at 9:28pm
Jason
Thanks but not getting the photo at the top of my page yet
Lost after I hit MY PAGE-- in settings
What is that stuff that comes up ?
Nothing about picture uploading
Good info about the freon change comming
Comment by Jason Edge on December 8, 2012 at 3:55pm

Bumping this up again...

Comment by Jason Edge on November 12, 2012 at 7:53am

Just bumping this up since Kurt just customized his page.   Everyone can customize "their" page just has Kurt and I have. To see Kurt's page go to http://6364cadillac.ning.com/profile/KurtEdmiston

You can see mine at http://6364cadillac.ning.com/profile/jasonedge

Photos

  • Add Photos
  • View All

Forum

vacuum canister

Started by Walt Timmerman in General Discussion. Last reply by Rob Shatsnider 15 minutes ago. 15 Replies

what is the vacuum canister for that is behind the drivers front fender?After removing my fender I see its got a hole in the top but nothing is hooked to it and no line is laying there.Any help would…Continue

New Batch of Embroidered Iron-On 1963/64 Cadillac Chapter Patches - $4 each

Started by Jason Edge in Chapter Discussion. Last reply by mark zimmerman 5 hours ago. 10 Replies

As noted in our August 1963/64 Cadillac Chapter Newsletter:Around 6 years…Continue

Tags: Available, Patches, Chapter, Cadillac, 1963/64

63 coupedebille fuel pump issues

Started by Daniel Grande in 1963/64 Cadillac Specific Discussion. Last reply by Daniel Grande 13 hours ago. 9 Replies

I have a 63 cadillac and I took it to a mechanic for a motor tune up long story short the fuel pump gave out and hes tried twice to order it and he says it didnt fit the original pump is smaller on…Continue

64 deville choke heat tube

Started by Thomas Yarri in 1963/64 Cadillac Specific Discussion. Last reply by Thomas Yarri 14 hours ago. 2 Replies

Hey guys hope you’re having a great day. I have a question about the choke heater tube. Mine is loose at the intake and seems to be causing a vacuum leak. Any thoughts on how to seal this up?

Blog Posts

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service