Steering Coupler (Rag Joint) 1963 Cadillac with Tilt Wheel
Hi all,
I am in the process of replacing my steering gear box. Upon removal I notice that the rag joint is showing some stress, my car has tilt wheel. My question is, are the rag joints common between tilt and non-tilt cars or are they different? So before I start researching for a replacement part I want to be sure I get the correct one. Thanks everyone.
Jim
Replies to This Discussion
-
Permalink Reply by Robert Alan Shannon on
-
According to the info in Tilt Steering Conversion under HELP Topics, they are different. I don't know the difference, mines non-tilt. HTH
-
Permalink Reply by Jason Edge on
-
Hi Jim, Tilt is smaller diameter on the column side. I have very nice, used non-tilt rag joints with excellent masticated rubber, ground wire etc. for $35 + s/h. If you need tilt I would need to double check. Email at jasonedge@nc.rr.com if interested and provide a shipping address.
-
Permalink Reply by Jim Pino on
-
Hi Jason thanks for the quick response. I figured there had to be some difference. My car has tilt, if you get the chance to see if you have one I would appreciate it. Jim
-
-
I checked and I am out of the tilt rag joint. If Russ or one of the others don't have one, give me a shout at jasonedge@nc.rr.com and I will put you on the Wait List for one.
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 19 hours ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari Feb 16. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
