Hello,

Has anybody got a decent cross reference for Benton Blue to a newer GM or other number? I've tried all the paintref cross references and come up empty handed at my supplier.  I did a colour match with the scanner and sprayed a few tests out, but I'm not totally pleased on the colour match.  

I'll take whatever suggestions anybody has  Much appreciated,

Chris

1963 Fleetwood

Views: 199

Reply to This

Replies to This Discussion

It took my “old school” painter about 3 tries to get the Sierra Gold just right on my 64. We had it scanned and worked from there but still took several tweaks. If memory serves, a touch of green did the final trick. Who wudda thunk?

Thank You for the advice!  Worked with a great supplier in North Bay, Ontario who worked on it for about an hour.  I'm pleased with the match.  Ended up with a colour called Misty Lake Metallic. WA683R.

Many spray outs in the garage and I'm satisfied that its going to look great (and stock).

when I was at a PPG distributor I found my paint color.

I looked it up by name and by paint code number. 

Palomino gold or paint code #47 is what i believe it was. 

I found the formula in PPG basecoat clear coat. 

RSS

Photos

  • Add Photos
  • View All

Forum

64 Brakes

Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari 2 hours ago. 3 Replies

Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue

Heater Control Valve

Started by Michael Monson in Wanted to Buy 12 hours ago. 0 Replies

Looking for a heater control valve 9.795 for my 1964 Deville.  ThanksContinue

Burning Rubber

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Sunday. 7 Replies

Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light?   Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue

Gas gauge only reads half when full

Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin Feb 18. 1 Reply

Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service