Trunk Lid
Are the trunk lids the same on all 63/64 models? Need one for my 63 SDV and would like to know what would work. Seems like the crest and v were different but figure that can be worked around.
Thanks for any info.
Tom B
Replies to This Discussion
-
Permalink Reply by bc9f570155ea4f8584ce20a1f565f15f on
-
Hey Tom,
The trunk lids are one year only.The 63s go straight across the bottom edge,where as on the 64 there is a notch in the center for the license plate,it`s the easiest way to tell..
Chris
-
Permalink Reply by Tom Bahner on
-
Thanks so much Chris. That definitely narrows the possibilities.
Tom B
-
-
Absolutely no problem Tom!! I spent two years trying to find a solid trunk lid for my 64 limousine,but it`s worth the effort!!
Good luck!!!Chris
Members
Forum
Replace Choke Tube or Install Electric Choke?
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch 9 hours ago. 5 Replies 1 Like
My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
Tags: Electric Choke, Choke Tube
window regulators
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 2 Replies 0 Likes
For years my winds have seemed to be looser and less accurate than most modern windows. I am thinking the soft parts are worn. Has anybody gone through thier window regulators and felts to restore…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Thursday. 35 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
