The temperature gauge of my 63 Eldorado does not work properly.
It goes slowly all the way up and stays there, while the true temperature is around 155-160 F (water in the radiator and/or the top of the thermostat housing).
Where should I start to solve the problem? The gauge itself, the temperature sensor, or the wiring? Or something else? The sensor is a new (aftermarket part) and the thermostat worked fine when I tested it in a saucepan.
Many thanks
-Samu
Comment
That is good news, Bob. I ordered 5 and will do a comparison with the original I have in my car.
Jason.
It recently bought an ACDelco temp sensor from Rockauto https://www.rockauto.com/en/moreinfo.php?pk=343530&cc=1320309&a...
It is working like it should, reading the temperature correctly.
That is good news indeed. Now, if they would only start reproducing the correct replacements. The list if defective replacement parts is growing!
Better late than never:
I finally plugged in the good used temp sensor bought from Jason, and the problem is solved.
The temp gauge stayed now at the lower 1/4 mark. The weather was allready quite cold (~35 degrees Fahrenheit), but with the previous sensor the gauge went up whatever the outside temperature was.
That test drive was the last one for this season. Case closed and a good start for the garage season.
-Samu
As Chris noted, most new temp sending units (at least the ones from China) are mis-calibrated and give a false hi reading. I have a good used sending unit that gives a resistance in the correct range I have seen for good sending units over the years for $20. I only have the one for now and the demand has been growing. I can ship to US destinations for $10 for a total of $30. If you want it, shoot me an email to jasonedge@nc.rr.com.
I was just talking about this with Jason the other day as my car is doing the same thing. The new temperature sensors can be junk straight out the box. I believe Jason might have an extra used original one. I just ordered one from him yesterday.
Started by Donald Swenson in 1963/64 Cadillac Specific Discussion. Last reply by Donald Swenson yesterday. 2 Replies 0 Likes
Hello,Just wondering if anyone has photos to where I need to apply new SEM seam sealer on the front of the fenders to the inner top Cowl area and the corners of the Radiator support?I am in the…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 2 Replies 0 Likes
I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 8 Replies 0 Likes
The wintertime blues are hitting hard as 3-6" of snow is forecasted for later this week. Share your favorite photos of your 63 or 64 Cadillacs! Spring/Summer/Fall cant get here soon enough!Thanks for…Continue
Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Friday. 2 Replies 0 Likes
My 63 Park Avenue has a leak at the differential. My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket. I also…Continue
Tags: Replacement, Seal, Pinion
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 23, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website