The Seat Are Done!
Replies to This Discussion
-
Permalink Reply by Michael Vogler on
-
Tony,
The leather came from SMS Auto Fabrics. It's a little pricey, but the leather and hole patters and shapes are perfect. (I believe that SMS has some of the the original Cadillac leather dies. It sure looks like it). After placing the order, which you have to pay in advance, I received my leather in about 2 months.
I don't know who the upholsterer is as he was subcontracted through my body shop. But, I will find out and let you know.
As an aside, I'm a bit worried about scratching up the leather (my wife has two miniature schnauzers that must go everywhere with her and their nails will do terrible damage to the glove leather). Do you have any advice on clear plastic seat covers? (I can't believe I even have to ask that question..but you pick your battles. ;-)
Cadillac had a clear cover as an option in 1964, but of course NOS/OEM covers would almost certainly not be serviceable, if you can even find one.
Mike
-
-
Good point about who I would be saving the interior for...the next owner? As I've instructed my wife, there will be no next owner as I intend to be buried in my Deville! (I know that it's selfish to deprive someone of enjoying the car down the road, but if I'm going to Heaven (or Hell, as the case may be), I'm goin' there in style!)
Mike
-
Permalink Reply by Jason Edge on
-
Very Nice!
-
Permalink Reply by Tony Prichard on
-
How much did that run you altogether if you don't mind my asking? Thanks!
Members
-
Ian Arnold Online
-
-
Forum
Welcome Returning Member Maurice Hamelick from the Netherlands!
Started by Jason Edge in Chapter Discussion. Last reply by Maurice Hamelink 19 hours ago. 2 Replies 1 Like
I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 4 Replies 0 Likes
I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 3 Replies 0 Likes
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt May 20. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
