3 things to discuss speedo inaccurate,Gas smell with no leaks, 3rd air shocks

OK the speedo  is off by  9 miles an hour after I put on the radial tires I have a pink gear which I think is 35 teeth so it looks like I need a 38 tooth blue?    Another issue I have is a gas smell  coming from  the rear of the car no leaks I have cked it 3 times no leaks is that tube that hangs off of the rear of the gas tank with the loop is that supposed to have piece of foam or a ck valve in it Mine has none. 3rd when I put 4 people in the car it bottoms out on speed bumps I was thinking of putting some monroe air shocks in the rear just wondering if someone has done that.     Thanks

Views: 110

Reply to This

Replies to This Discussion

Mark, It might be better to split these items out in to 3 topic discussions as they are very different and following one topic thread can sometimes be a challenge, much less three!

I will take a stab at the speedometer being off. There is no indication that it has been replaced, but with being 9 mph off (I am assuming at 55mph??.. it will increase as you increase speed), I am guessing the transmission has been swapped out with one with a speedo gear for the "other rear end"?

For your deVille convertible which came with a Turbo HydraMatic the two speedometer gears per info on our Rear End Differentials: Gear Ratios, Controlled Differentials and S...  Help Page would be as 40 teeth gear for the 3.21 rear end differential, or a 37 teeth gear for the 2.94 rear end differential:

-64 Turbo Hydramatic , part # A148 1859 axle ratio 3.21, 40 teeth
-64 Turbo Hydramatic, part # B135 9271, axle ratio 2.94, 37 teeth

First confirm the transmission in the car, then confirm the gear ratio of the differential. That same help page will show you a "1" stamp on differential front carrier means 3.21 gear, and "2" means 2.94 gear.

Whatever you have it sounds like you need the other and I should have either one on hand. 

RSS

Photos

  • Add Photos
  • View All

Forum

A Big Welcome to the 63/64 Cadillac Chapter to my Brother Randy

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Randall (Randy) Edge on Wednesday. 2 Replies

My brother Randall (Randy) Edge has been helping me off and on for many years with traveling to pick up parts cars all over the east cost, to almost anything and everything I need help with around…Continue

Frost plugs

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari May 23. 5 Replies

Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue

Trivia Question #37: A Jiggy Car Frame Tool!

Started by Jason Edge in Trivia May 22. 0 Replies

Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue

Trivia #36: NUTTY Fastener Trivia

Started by Jason Edge in Trivia. Last reply by Jason Edge May 22. 1 Reply

Ok. Here is a fastener I see about every day working with my big inventory of fasteners, and thought it was worth posting as trivia. If you saw my post on Facebook (I do sell them), wait to see if…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service