The temperature gauge of my 63 Eldorado does not work properly.
It goes slowly all the way up and stays there, while the true temperature is around 155-160 F (water in the radiator and/or the top of the thermostat housing).
Where should I start to solve the problem? The gauge itself, the temperature sensor, or the wiring? Or something else? The sensor is a new (aftermarket part) and the thermostat worked fine when I tested it in a saucepan.
Many thanks
-Samu
Comment
That is good news, Bob. I ordered 5 and will do a comparison with the original I have in my car.
Jason.
It recently bought an ACDelco temp sensor from Rockauto https://www.rockauto.com/en/moreinfo.php?pk=343530&cc=1320309&a...
It is working like it should, reading the temperature correctly.
That is good news indeed. Now, if they would only start reproducing the correct replacements. The list if defective replacement parts is growing!
Better late than never:
I finally plugged in the good used temp sensor bought from Jason, and the problem is solved.
The temp gauge stayed now at the lower 1/4 mark. The weather was allready quite cold (~35 degrees Fahrenheit), but with the previous sensor the gauge went up whatever the outside temperature was.
That test drive was the last one for this season. Case closed and a good start for the garage season.
-Samu
As Chris noted, most new temp sending units (at least the ones from China) are mis-calibrated and give a false hi reading. I have a good used sending unit that gives a resistance in the correct range I have seen for good sending units over the years for $20. I only have the one for now and the demand has been growing. I can ship to US destinations for $10 for a total of $30. If you want it, shoot me an email to jasonedge@nc.rr.com.
I was just talking about this with Jason the other day as my car is doing the same thing. The new temperature sensors can be junk straight out the box. I believe Jason might have an extra used original one. I just ordered one from him yesterday.
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill on Monday. 2 Replies 0 Likes
I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue
Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies 0 Likes
What parts to your need for your Cadillac? Need a part to get it running or just to tidy things up a bit? Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue
Started by Ian Arnold in 1963/64 Cadillac Specific Discussion Jul 22. 0 Replies 0 Likes
Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue
Started by Jason Edge in General Discussion. Last reply by Cees de Bunje Jul 22. 10 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website