The temperature gauge of my 63 Eldorado does not work properly.
It goes slowly all the way up and stays there, while the true temperature is around 155-160 F (water in the radiator and/or the top of the thermostat housing).
Where should I start to solve the problem? The gauge itself, the temperature sensor, or the wiring? Or something else? The sensor is a new (aftermarket part) and the thermostat worked fine when I tested it in a saucepan.
Many thanks
-Samu
Comment
That is good news, Bob. I ordered 5 and will do a comparison with the original I have in my car.
Jason.
It recently bought an ACDelco temp sensor from Rockauto https://www.rockauto.com/en/moreinfo.php?pk=343530&cc=1320309&a...
It is working like it should, reading the temperature correctly.
That is good news indeed. Now, if they would only start reproducing the correct replacements. The list if defective replacement parts is growing!
Better late than never:
I finally plugged in the good used temp sensor bought from Jason, and the problem is solved.
The temp gauge stayed now at the lower 1/4 mark. The weather was allready quite cold (~35 degrees Fahrenheit), but with the previous sensor the gauge went up whatever the outside temperature was.
That test drive was the last one for this season. Case closed and a good start for the garage season.
-Samu
As Chris noted, most new temp sending units (at least the ones from China) are mis-calibrated and give a false hi reading. I have a good used sending unit that gives a resistance in the correct range I have seen for good sending units over the years for $20. I only have the one for now and the demand has been growing. I can ship to US destinations for $10 for a total of $30. If you want it, shoot me an email to jasonedge@nc.rr.com.
I was just talking about this with Jason the other day as my car is doing the same thing. The new temperature sensors can be junk straight out the box. I believe Jason might have an extra used original one. I just ordered one from him yesterday.
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
Back in November I started rescanning the Serviceman Bulletins as a…Continue
Started by Jason Edge in Restoration Discussion on Sunday. 0 Replies 1 Like
After making a decent start on cleaning up a section below right rear area of my my 64 Coupe de Ville - Dino's undercarriage, I have been slow to make more progress but in the last couple of days…Continue
Started by john w. warner in For Sale. Last reply by Logan Robb on Friday. 2 Replies 1 Like
Its on Hemmings.Needs work!Continue
Started by Stephen Pechenik in Restoration Discussion. Last reply by Russ Austin Jan 21. 6 Replies 0 Likes
I am readying my Fleetwood to be painted. I need to replace the driver's side left chrome eyebrow molding (below the headlights). It appears to be made from pot metal. Mine is broken and I need to…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
February 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website