If you checked out the latest newsletter I included a cool 64 Eldorado promo Picture that I had picked up a few months ago.  Click to enlarge and see this beauty!

Views: 156

Reply to This

Replies to This Discussion

Hey Jason,

Somewhere, packed away in my car files I have an original 8x10 color transparency of that same photo.  

It was part of the 1964 Press Kit that went to magazine journalists (not a lot of those, back in '64) for publication. Judging by the size and quality of the film, it looks like an original, taken by a large-format view camera. 

Back in the '90s, I had an enlargement made and hung it on my Motor Trend office wall.

If I run across it, I'll definitely post it.  Yes, the car is Firemist Saddle. 

This picture is 12" x 18' on an odd all black paper. There was no writing on it and not sure how it was taken or printed but definitely not your stock photo paper, more like a film paper ... but not a transparency of course. It is now in a frame. 

I also have another promo picture that looks like the same car and taken at the same time but it is a smaller 4 1/2" x 9 1/2" size, and at more of an overhead angled shot. It is also has some "For Release" write-up below the picture and will scan it and the picture soon and share. 

the 64 does not have rear fender skirts?

Pretty car and great pictures

There was not fender skirt on the Eldorado. There was a fender skirt on the other body styles. 

Yep. I love the no-skirt look of the '64 Eldo.  Really gives a sportier appearance to the car. 

I always make the point to anyone who comments on my '64 Eldo that the no-skirt styling was Eldo-only, and 1964-only.  I have not met a single person (even other "Cadillac guys") who knew that detail.  

Of course, members of this site do, but it's fun trivia to tell to others.

RSS

Photos

  • Add Photos
  • View All

Forum

Burning Rubber

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies

Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light?   Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue

Gas gauge only reads half when full

Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 1 Reply

Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue

64 Brakes

Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service